Accessories set for drum pumps B2 Vario
Product number:
7930292
Manufacturer:
Lutz Pumpen GmbH
Packaging information:
Length:
463 mm
Width:
369 mm
Height:
225 mm
Weight:
0.653 kg
Description
Supplied with: Lutz nozzle, 1.5 m PVC hose 3/4", hose connection, hose clamps, wall bracket
Properties
| For: | B2 Vario PP, B2 Vario Niro |
|---|---|
| Manufacturer Article Number: | 0201-550 |
Skip product gallery
Anti-static set
From
€57.00*
Flow Indicator with paddle wheel, SAN
From
€56.50*
Solvent pump hand operated, for tinplate canisters
From
€548.60*
Hand pumps OTAL®, PP
From
€85.20*
Solvent pump foot operated, with flexible tubing
From
€746.40*
Drum pump Pump-it®
From
€143.60*
Barrel pumps, PP, with flexible, PVC dispensing hose and stopcock
From
€159.60*
Drum pump sets B2 Vario, mains-powered, stainless steel
From
€883.00*
Thread adapter set
From
€21.70*
Similar products
When dispensing combustible/explosive liquids pump, both dispensing and filling drum involved in the process must be sufficiently earthed, in order to prevent ignition or explosion through electrostatic discharges. Antistatic set, includes three colour-coded connecting cables with clamps, supplied complete in plastic case.
For liquid flows down to 5 ml/sec. Wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95 ml/sec, max 2 bar pressure. Not to be used with corrosive fluids or over +85 °C. Can be used with gases.
For contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).Medium-contacting parts are made of stainless steel (1.4301) and PTFEFor containers up to 60 litresIncl. connector thread for pull-out spouts with Ø 35 mm
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor weak acids, alkalis and detergents
For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).Medium-contacting parts made of stainless steel (1.4301) and PTFEFor barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depthSuitable for steel barrels with R 2'' thread
For rapid and clean emptying from cans, drums and small barrels up to 60 l.Medium-contacting parts made of PP, PE and FKMPrecise dosing, without drippingPump connection suitable for 64 mm dia. (BSI) container threadsStepless length adjustment of immersion tubeThreaded adapters for most commercially-sold containers availableNot suitable for HCl
For decanting acids, caustic solutions and aggressive detergentsExcellent recovery of residual liquid in the barrel provided by base-sitting, non-return valve and steplessly adjustable immersion tubeFor barrels and tanks from 30 to 1000 l
Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.Motor 230 V, 200 W (IP 24)Seal less pump tubeSuitable accessory flow meter requiredPump with tubing connectionStainless steel version for low-viscosity lubricants.Scope of supply: Motor B2 Vario, pump tube, PVC spiral hose (1.5 m), hose connectors, hose clamps, Lutz nozzle, wall bracket
Thread adapter set consisting of:3/4'' Hünersdorff3/4" Kautex3/4" cylindrical R 3/4" barrel thread3/4" conical R 3/4" barrel threadHex wrench for threaded adapter