Accessory holders for sedimentation cones, PVC
Product number:
9882101
Manufacturer:
Behr Labor-Technik GmbH
Packaging information:
Length:
522 mm
Width:
210 mm
Height:
70 mm
Weight:
1.066 kg
Description
Imhoff pattern, solid grey PVC. Stable design.
Properties
| Manufacturer Article Number: | B00179001 |
|---|---|
| No. of sedimentation cones: | 2 |
Skip product gallery
From
€141.90*
From
€132.60*
Other customers also bought
Kartell S.p.A.
Kartell S.p.A.
Sedimentation cones, accessory stand, Acrylic/PP
Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.
Behr Labor-Technik GmbH
Behr Labor-Technik GmbH
Accessory holders for sedimentation cones with stopcock, PVC
Imhoff pattern, solid grey PVC. Stable design.
Skip product gallery
From
€183.00*
From
€68.90*
Accessories
H. & K. Starke GmbH
H. & K. Starke GmbH
Sedimentation cones, borosilicate glass 3.3
Imhoff pattern. DIN 12672. Graduations and inscriptions in contrasting white enamel. Ring mark at 1000ml.* No subdivisions from 100 to 1000 ml.
Kartell S.p.A.
Kartell S.p.A.
Sedimentation cone, plastic, SAN
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
Skip product gallery
Sedimentation cone, plastic, SAN
From
€68.90*
Imhoff Sedimentation cones, borosilicate glass 3.3
From
€109.20*
Secchi Disk
From
€31.85*
Sedimentation cones, borosilicate glass 3.3
From
€183.00*
Flocculation tester ET 730 / ET 740 / ET 750, bench top
From
€1,613.60*
Turbidity meter Turb® 430
From
€2,120.00*
Turbidity Standards
From
€118.00*
Turbidity meter TB 211 IR
From
€888.10*
Sedimentation unit set, Nalgene®, PC
From
€204.60*
Similar products
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.
For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.Lowering line, please order separately.
Imhoff pattern. DIN 12672. Graduations and inscriptions in contrasting white enamel. Ring mark at 1000ml.* No subdivisions from 100 to 1000 ml.
Designed for efficiency testing of flocculation or precipitation agents.For use in laboratories. Model ET 730 portableIlluminated back panel for glare-free observation of the samplesModels ET 740 and ET 750 with continuously variable stirring speedSpeed of ET 730 can be adjusted to 20, 40, 50, 100 and 200 min-1Timer feature and digital displayHeight adjustment of the stirring blades during operationFor beakers with 1000 to 1500 ml volume, tall and low formSpecificationsSpeed controlAL30:
AL40 + AL50:20, 40, 50, 100, 120 min-1
10 ... 300 min-1 (stepless)TimerAL30:
AL40 + AL50:0 ... 30 minutes (continuous)
0 ... 999 min or 0 ... 99 h (continuous)Power Supply:100 ... 240 V, 50/60 Hz
The turbidity meters Turb® 430 IR acc. to DIN ISO 27027 and Turb® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.Scope of supply: Turbidity meter with calibration set 0.02-10.0-1000 NTU
Highly accurate turbidity standards composed of suspended microspheres, suitable for Instrument calibration and control of all turbidity meters. Stable, shelf life of 2 years (from Date of Manufacturing). NIST traceable, US EPA approved and tested in compliance with ISO 7027. HDPE bottles of 100 ml.Two ranges available:Ratio range for Ratio Turbidity Measuring instruments (measure of the scattered light from the sample at a 90° angle from the incident light, plus at additional angles (several detectors)Non Ratio for Non Ratio Turbidity Measuring instruments will measure the scattered light from the sample at a 90° angle from the incident light (one detector)
The compact infrared turbidity meter TB 211 IR is designed to allow fast, precise on-site testing. The unit measures the scattered light at an angle of 90°, as stipulated in EN ISO 7027. The wide measuring range from 0.01 to 1100 TE/F = NTU = FNU permits use of the unit for various media, ranging from drinking water to waste water.As infrared light is used for measurement, the unit can be used to test both coloured and colourless liquids. The standards required for calibration of the unit are also supplied. A second adjustment mode allows alternative adjustment with user-defined turbidity standards.measuring ranges from 0.01 to 1100NTU (autorange)measurement with infrared light at an angle of 90°easy operation600 tests between battery chargesScope of supply: Turbidity meter, 4 turbidity standards <0.1, 20, 200 and 800NTU, battery, USB cable (1.5 m), test vial, manual, warranty statement, caseSpecifications:Measurement cycle:approx. 9 secondsDisplay / Function:LCDOptics:temperature-compensated LED and photosensor amplifier in waterproof sample chamberKeypad:
Measuring range:4 key polycarbonate membrane
0.01 to 1100NTU (autorange)Resolution:0.01 to 9.99NTU = 0.01NTU
10.0 to 99.9NTU = 0.1NTU
100 to 1100NTU = 1NTUAccuracy:±2.5 % of measuring value or ±0.01 NTU (0 to 500 NTU)
±5 % (500 to 1100NTU)Interface:
Housing:
Dimensions (L x W x H):Micro USB
ABS
190 x 110 x 55mmWeight (Basis unit):approx. 0.4kgTemperature:0 to 40°CHumidity (rel.):30 to 90 % R.H.CE-conformity:DIN EN 50081-1,
VDE 0839 part 81-1:1993-03,
DIN EN 50082-2,
VDE 0839 part 82-02:1996-02
Transparent, shockproof, with easily readable white graduations. Sedimentation and centrifuge tests for sludge quality are used in the analysis of the active sludge deposition process.Scope of delivery: Jar and cover (PC), scoop (PP), 10 x 15 ml conical centrifuge tubes (PC), with caps (PP), manual and data sheet.