Beakers, glass, jacketed, type T
Product number:
9032371
Manufacturer:
KGW Schieder GmbH
Packaging information:
Length:
234 mm
Width:
174 mm
Height:
180 mm
Weight:
0.26 kg
Description
DURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass olives (O.D. 12mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +300°C at maximum. Special sizes available on request.
Properties
| Connection: | Glass olive |
|---|---|
| Dimensions external (Ø x H): | 70 x 120 mm |
| Dimensions internal (Ø x H): | 55 x 115 mm |
| Ext. height: | 120 mm |
| Ext. Ø: | 70 mm |
| Height int.: | 115 mm |
| Int. Ø: | 55 mm |
| Manufacturer Article Number: | 1351 |
| Material: | Boro 3.3 |
| Max. coolant pressure: | 0.5 bar |
| Max. temperature resistance: | 300 °C |
| Nominal capacity: | 250 ml |
| Olives ext. Ø: | 12 mm |
| Temperature resistance: | 300 °C |
Skip product gallery
Temperature hoses, stainless steel 1.4404, triple insulation
From
€317.00*
Thermal fluids SilOil
From
€450.00*
Tempering liquids for dynamic temperature control systems PRESTO
From
€125.00*
Tempering liquids
From
€120.00*
Bath fluid Polyclear Mix 30 Plus
From
€174.80*
Function upgrade for Huber circulators
From
€455.00*
MaloClean Aquastabil
From
€19.90*
Thermal fluids MinOil
From
€230.00*
Similar products
Temperature hoses with special triple insulation and two M16 x 1 connections. The ends are covered with silicone caps for protection. Max. pressure 6 bar (at 20 °C), 4 bar (at 350 °C).
Huber thermal fluids are recommended because they have the best possible thermodynamic and environmental characteristics. Safe reliable operation relies on compliance with safety standards to ensure optimal results.Temperature ranges refer to use in closed systems.
Long-term tested for safe and reliable operation. Low toxicityLow viscosityHigh stabilityAlmost odor-freeGood thermal conductivityLow corrosion susceptibilityWide temperature ranges
Long-term tested for safe and reliable operation.Low toxicityLow viscosityHigh stabilityAlmost odor-freeGood thermal conductivityLow corrosion susceptibilityWide temperature ranges
Prevents premature rusting and the growth of algae. Ideal for use in circulators, water baths, shaking water baths or heating baths. For routine applications from 5 to 90 °C.
E-grade - innovative activation keys for the functionality to suit your budget and process requirementsEvery application requires particular functions. If the circulator is to be used in a range of applications it will generally require greater functionality. The required functionality grows with the complexity of the application. The innovative "E-grade" has the answer. Models with the Pilot ONE Controller have a comprehensive range of functions suited to the classical temperature control applications. The E-grade allows the functionality to be extended at any time to suit new process requirements and budget. E-grade stands for electronic upgrade and it is simple to do: To extend the functionality a unit specific code is entered via the controller. This code is specific to the serial number of the unit and is either already entered at the factory for new units or it can be activated at a later date. The code is sent by email. There is no requirement for a hardware or software update.The E-grade "Explore" for Unistats is more than just another functions package. It makes important information available to users of Unistat temperature control systems. Temperature values and temperature differentials as well as for the actual heating power, cooling power and pump power within the system are displayed on the touch-panel. E-grade "Explore" is an evolution of the existing Unistat technology. Existing sensors are utilised to make important process temperature and power data visible. In addition to making the data visible on the display of the device, it can also be accessed via the digital interfaces for further processing. Application examples for E-grade® "Explore": Process and product development and optimisation Use-Tests of raw materials, quality control Enhanced data collection for scale-up trials
Stabilising agent for water baths, thermostats etc.Should be prepared with distilled water if possible.Attention: Toxic to aquatic organisms with long-term effects. Avoid release into the environment.
Huber thermal fluids are recommended because they have the best possible thermodynamic and environmental characteristics. Safe reliable operation relies on compliance with safety standards to ensure optimal results.
Skip product gallery
Beakers, glass, jacketed wiht PTFE-Olive, type T-GL
From
€120.50*
Customers also viewed
DURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass-screw connections GL14 with PTFE olives (O.D. 9mm, T-GL2000 with GL18 and O.D. 11mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +120°C at maximum. Special sizes available on request.