Burette with straight standard ground stopcock, DURAN®, class AS, with PTFE key
Product number:
9270922
Manufacturer:
DWK Life Sciences GmbH (Duran)
Packaging information:
Length:
826 mm
Width:
87 mm
Height:
55 mm
Weight:
0.174 kg
Description
The original DURAN® burettes are manufactured from chemically highly resistant borosilicate glass 3.3. Thanks to the precise scale, they are ideal for titration. Calibration is based on the released volume ("Ex") at a + 20°C reference temperature. This means the fluid quantity released can be taken exactly from the scale, as the liquid adhesion to the glass is taken into account in the calibration. Volume content tolerances conform to DIN and ISO accuracy limits.
- With Schellbach stripe and main graduations as circular divisions
- Conforms to ISO 385
- Autoclavable
- Corresponds to USP / EP and JP guidelines
Properties
| Accuracy class: | AS |
|---|---|
| Division: | 0.05 ml |
| Height: | 820 mm |
| Manufacturer Article Number: | 243303304 |
| Material: | Boro 3.3 |
| Nominal capacity: | 25 ml |
| Standard: | ISO 385 |
| Stopcock: | Straight |
| Tolerance: | 0.03 ml |
| UNSPSC: | 41121808 |
| With Schellbach stripe: | Yes |
Skip product gallery
Burettes, with straight stopcock, borosilicate glass 3.3, class AS
From
€87.70*
Burette clamp
From
€36.70*
Automatic burettes acc. to Schilling pattern, blue graduation, DURAN®
From
€88.20*
Automatic burettes, schilling pattern, borosilicate glass 3.3/LDPE
From
€121.40*
Burettes, with lateral valve cock, borosilicate glass 3.3, class AS
From
€107.10*
Automatic burettes with splinter protection, Schilling pattern, borosilicate glass 3.3
From
€72.20*
Automatic burettes, glass, Schilling pattern, boro 3.3, class B
From
€86.70*
Micro burettes acc. to Bang, DURAN®, class AS, certified conformity, with glass key
From
€174.90*
Analytical volumetric solutions
From
€16.50*
Automatic burettes, borosilicate glass 3.3, class AS
From
€258.00*
Micro burettes acc. to Bang, DURAN®, class AS, with stand
From
€196.90*
Burettes, with straight valve cock, borosilicate glass 3.3, Class AS
From
€180.00*
Similar products
With class AS, conformity certified, with batch identification, blue graduations, DIN EN ISO 385. PTFE spindle.
Polypropylene. Bosshead supplied with two adapters so that the clamp can fit on to support rods having diameters 8 to 14mm. Stainless steel spring loaded centre arm holds burette firmly against the two outer arms and is protected by rubber grips. Graduations and meniscus are visible at all times. Suitable for all burettes.
Fast flow burette with 500 ml plastic reservoir bottle (up to 10 ml) or 1000 ml (from 15 ml). Schellbach stripe and graduation in high contrast blue enamel.
Described as automatic burettes with fast titration and practical usageEspecially suitable for field analysis where there is a risk of breakingThe entire system consists of a burette tubing with automatic zeroing system together with a valve stopcock, a reservoir bottle and a bottle standRapid filling by squeezing the bottle and fast titration by valve stopcockInscriptions and graduations are printed with blue enamel which is specially designed for glass useClear burettes are manufactured with schellbach stripe10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used with bottles of 1000 ml volume
All BLAUBRAND® burettes are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Blaubrand®DIN EN ISO 385DE-M markingGraduations and inscriptions in high contrast blue enamelWith Schellbach stripeCalibrated to deliver (EX)
Burette according to Dr. Schilling with splinter protection, with Schellbach stripes, automatic zero point extraction and Bürkle dosing device. The glass burette is covered with a plastic sheet which increases the tensile strength and serves as splinter protection. The probability that the burette breaks is reduced compared to conventional burettes and even in case the burette breaks, no dangerous splinters will be produced. The dosing device allows precise dosage via the pushbutton or via the micro-screw as well as precise dispensing via a fine spout tip.With splinter protectionAdjusted to ExShatterproof, resistant to chemicalsExact spout tip, fine droplet formationParts in contact with the medium: PE, natural rubber, PP, Borosilicate glass
Silberbrand. Tolerances to class B, DIN EN ISO 385. Borosilicate glass 3.3 burette. PVC filling tube and silicone outlet tubing. LDPE reservoir bottle with HDPE base. Brass / PP micrometer screw. Graduations and inscriptions are in highly contrasting black enamel. With Schellbach stripes. Squeezing of bottle allows rapid filling. Fine titration is easy using the micrometer screw. Coarse titration is achieved by removal of the micrometer screw and using the push button. Calibrated to deliver (EX).
Blue graduated, with dated batch identification. Straight stopcock and stopcock on filling tube with standard ground glass key. Schellbach stripe for enhanced legibility, main point ring graduation. Calibrated for EX, DIN EN ISO 385.Additional batch certificates can be generated and printed at any time free of charge on the manufacturer's website.
Suitable for manual and automatic titrations. Stability is proven (either opened or unopened) for the entire shelf life. Tested acc. to ISO17025.
Manufactured from pre-vacuum calibrated borosilicate glass. They meet the highest quality standards according to DIN EN ISO 385Permanent quality control through all steps eliminates possible deviations from nominal valuesCalibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class "AS" standardsConformity ("DE-M") certified, with a batch number printed on the body. Batch certificate can be downloaded from the suppliers websiteSupplied with an automatic zeroing system, VALVE stopcock and also an intermediate PTFE stopcock to recirculate the remaining liquidWith schellbach stripeInscriptions and graduations are printed with special blue enamelPlease order glass bottles and bellows separately.
Blue graduated, certified conformity, with dated batch identification. With stand. Straight stopcock and stopcock on filling tube with standard ground glass key. Schellbach stripe for enhanced legibility, main point ring graduation. Calibrated for EX, DIN EN ISO 385.Additional batch certificates can be generated and printed at any time free of charge on the manufacturer's website.
All BLAUBRAND® burettes are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Blaubrand®DIN EN ISO 385DE-M markingMarks and inscriptions in high contrast blue enamelRing graduations at major subdivisionsSchellbach stripeCalibrated to deliver (TD, EX)