Calibration certificates Temperature for Cooling incubators KB ECO
Product number:
4685499
Manufacturer:
BINDER GmbH
Packaging information:
Description
Temperature measurement in the cooling incubator at a specific test temperature.
Properties
| Description: | Temperature measurement with 27 measuring points |
|---|---|
| Manufacturer Article Number: | 8012-2110 |
Skip product gallery
LLG-Petri dishes, PS
From
€72.40*
Cooling incubator KT
From
€4,897.00*
Mini cooling incubator LLG-uniINCU 20 cool
From
€1,021.20*
Peltier-cooled incubator IPPecoplus
From
€5,704.00*
Cooled incubator FTC 120
From
€1,553.00*
Cooling incubators KB ECO
From
€8,568.00*
Peltier-cooled incubators IPP
From
€3,296.00*
Peltier-cooled incubator IPPeco
From
€5,349.00*
Cooled incubators with compressor cooling ICP
From
€6,991.00*
Cooling incubator KB PRO
From
€11,753.00*
Similar products
Made of high quality optical clear polystyrene. Produced under aseptic conditions in an ISO 6 cleanroom.With a smooth surface for an optimal distribution of the transport mediumStable thickness to prevent any deformations while usingStackableWith or without ventsAseptic (Ø 90 mm), non-sterile (Ø 60 mm) or beta irradiated sterile versions (all sizes)Packed in sleeves á 10 dishes or 20 dishes (Ø 90 mm)For research and development only.
Cooling incubator with Peltier technology combines exceptional performance with low energy consumption and environmental friendliness.APT.line™ preheating chamber technologyHot air disinfection at 100 °CAdjustable fan speedController with time-segment and real-time programmingInner door made of tempered safety glass2 stainless steel racksClass 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarmComputer interface: EthernetData recording and USB interface
Digital mini incubator with cooling and heating function for cultivation of biological samples in small-volume vessels. With internal power outlet for positioning small shakers, mixers, or other devices in the inner chamber. Due to its small footprint, the LLG-uniINCU 20 cool is ideal for small laboratories and educational institutions.Good temperature stability of the set temperature (up to 15 °C below ambient temperature) in the inner chamber of the cooling incubatorLarge inner chamber with 22 l capacityFast heating and homogeneous temperatureWith built-in calibration function of up to ±5 °CTemperature accuracy is ±0.5 °C (at 37 °C)Temperature uniformity is ±1.5 °C (at 37 °C)Scope of supply: Incubator, 1 x shelf, 1 x drip tray, 1 x power supply unit, 1 x power cable, operating instructions
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Cooled incubator with class A+ energy efficiency. Especially designed for BOD measurements.Fixed temperature of 20 °C.For up to 3 x BOD sensor system 6 bottles or 2 x BOD sensor system 10 bottles2 internal sockets for further devicesForced ventilation for uniform temperature distribution2-digit display for indoor temperatureHigh efficiency, low operating costsScope of supply: Cooled incubator, 2 shelves
Cooling incubator with environmentally friendly Peltier technology and APT.line™ preheating chamber technology for optimal incubation conditions. Ideal for applications in biotechnological, medical and pharmaceutical laboratories.Condensate and dry-out protection for all operating conditionsFail-safe operation due to intelligent thermoelectric temperature controlProgrammable temperatures for intermitted incubation and refrigerationAPT.line™ preheating chamber technologyAdjustable condensate protectionMinimal energy consumption thanks to Peltier technologyInner door made of safety glassInner chamber completely made of stainless steelInsertion grids made of stainless steelLCD display shows temperature, additional information and alarmsInternal data logger, measured values can be read out in open format via USBDevice self-test for status analysis
Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.Extremely quiet, vibration-free and space saving as no compressor is requiredNo condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchangedLED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)SingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
The cooled incubators with the unique ControlCOCKPIT for a quick and intuitive operation. Ideal at temperatures around zero and below. For rapid and precise alternation between heating up and cooling down times in ramp operation. Extraordinarily quiet.Standard equipment :PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel, material 1.4301 (ASTM 304) very stable and easy to cleanStructured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel (all sizes mounted on lockable castors)High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPITTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
The cooling incubators of the KB PRO series are equipped with APT.line™ preheating chamber technology and an extended temperature range. With their comprehensive programming options, the cooling incubators cover a wide range of applications. They are equipped with proven compressor technology to ensure reliable and failsafe long-term operation. Thanks to the modern inverter cooling unit and the climate-neutral refrigerant R-290, energy-efficient and environmentally friendly cooling is guaranteed. The inner chamber and the two racks with telescopic rails are made of stainless steel, while the inner doors are made of metal oxide-coated safety glass.Adjustable fan speedDoor heating to prevent condensationIntuitive touchscreen controller with time-segment and real-time programmingErgonomically adjustable control terminal (for models from 470 l volume)Signal triangle with light-up status display (for models from 470 l volume)Internal data logger, measured values can be read out in open format via USB interfaceEthernet interfaceBINDER Multi Management Software APT-COM™ Basic EditionDevice self-test for comprehensive status analysisClass 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarmLarge access port with silicone plugTable-top device KB PRO 130 is stackableFloor-standing devices with robust twin casters with brakes at the frontModels 260, 470, and 720 can be optionally equipped with light modules for ICH photostability tests. With optional LED light modules, the KB PRO models from 260 upwards become a plant growth cabinet. Please order light modules separately.