Dynamic climate chambers MKFT, with humidity control and extended low temperature range
€57,509.00*
Content:
1
Delivery according to order confirmation
Product number:
4705674
Manufacturer:
BINDER GmbH
Packaging information:
Description
Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.
Models with 480 V nominal voltage are equipped with a voltage and frequency converter.
- Homogeneous climate conditions thanks to APT.line™ preheating chamber technology
- Touchscreen controller with time-segment and real-time programming
- Internal data logger, measured values can be read out via USB
- Programmable condensation protection
- Troubleshooting system with visual and acoustic alarms
- Heated viewing window with LED interior lighting
- BINDER Multi Management Software APT-COM™ Basic Edition
- Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
- Ethernet interface
- Adjustable ramp function
- Integrated chart recorder
- Door heating
- Inner chamber made of stainless steel
- 1 stainless steel rack
- Humidity regulation with capacitive humidity sensor and responsive steam humidification
- Automatic water and wastewater management
- Integrated 20 l water storage tank
- 4 zero-voltage relay contacts
- CFC-free refrigerant R-452A and R-23
Models with 480 V nominal voltage are equipped with a voltage and frequency converter.
Properties
| Depth int.: | 600 mm |
|---|---|
| Ext. depth: | 1140 mm |
| Ext. height: | 2005 mm |
| Ext. width: | 1580 mm |
| External dimensions (WxDxH): | 1,580 x 1,140 x 2,005 mm |
| Height int.: | 1020 mm |
| Int. width: | 1200 mm |
| Internal dimensions (WxDxH): | 1,200 x 600 x 1,020 mm |
| Manufacturer Article Number: | 9020-0360 |
| Material inserts: | Stainless steel |
| Material interior: | Stainless steel |
| Max. no. of inserts: | 11 |
| Max. relative humidity: | 98 % |
| Max. temperature: | 180 °C |
| Max. voltage: | 480 V |
| Min. relative humidity: | 10 % |
| Min. temperature: | -70 °C |
| Nominal capacity: | 734 l |
| Plug type: | CEE |
| Power supply: | 480 V, 60 Hz |
| Power supply frequency: | 60 Hz |
| Rated capacity: | 11 kW |
| Relative humidity: | 10 ... 98 % |
| Temperature: | -70 ... 180 °C |
| Temperature stability: | 0,1 ... 0,1 K |
| Type: | MKFT 720 |
| Type of auxiliary energy: | Mains connection |
| Weight: | 887 kg |
| With CO₂ control: | No |
Skip product gallery
From
€71.60*
Accessories
BINDER GmbH
BINDER GmbH
Shelves for BINDER chambers and incubators, stainless steel
Shelves made of stainless steel, perforated.If you are ordering replacement shelves, please provide the serial number prior to ordering, since it might be necessary to order other shelves with different dimensions.
Skip product gallery
Constant climate chambers KBF-S ECO
From
€12,331.00*
Material test chamber FP series
From
€3,342.00*
Humidity Chambers HCP
From
€8,012.00*
Dynamic climate chambers MK
From
€16,531.00*
Dynamic climate chambers MKF, with humidity control
From
€19,549.00*
Similar products
Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. Particularly energy-efficient and low-noise thanks to Peltier technology with patented heat dissipation.Homogeneous climate even with full loadElectronically controlled APT.line™ preheating chamber technologyTemperatures up to 28 °C below ambient temperature possibleInner chamber made completely of stainless steel2 stainless steel grids incl. shelf supportAccess port with silicone plug Ø 30 mm, left sideUnit self-test for comprehensive status analysisLCD display for indication of temperature, humidity, alarms and additional informationInternal data logger with USB interfaceIndependent water supply via canisters
The material test chambers with mechanical convection reliably ensure short drying times and fast heating. Thanks to programme functions and adjustable fan, temperature and recirculation conditions can be individually controlled even over a longer period of time.High temperature accuracy due to APT.line™ technologyAdjustable fan speedController with interval and real-time programmingUser-friendly controller with large displayElectromechanical control of the exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm selectable on controllerModels up to 115 l stackableErgonomic handle designComputer interface: EthernetInternal data logger, measured values can be read out in open format via USB
The Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure.Model variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsHeated viewing window with LED interior lightingBINDER Multi Management Software APT-COM™ Basic EditionClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmEthernet interfaceAdjustable ramp functionIntegrated chart recorderDoor heatingInner chamber made of stainless steel1 stainless steel rackCFC-free refrigerant R-452AModels with 480 V nominal voltage are equipped with a voltage and frequency converter.
Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsHeated viewing window with LED interior lightingBINDER Multi Management Software APT-COM™ Basic EditionClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmEthernet interfaceAdjustable ramp functionIntegrated chart recorderDoor heatingInner chamber made of stainless steel1 stainless steel rackHumidity regulation with capacitive humidity sensor and responsive steam humidificationAutomatic water and wastewater managementIntegrated 20 l water storage tank4 zero-voltage relay contactsCFC-free refrigerant R-452AModels with 480 V nominal voltage are equipped with a voltage and frequency converter.