Gas inlet tube with valve stopcock, DURAN® tubing
Product number:
6200985
Manufacturer:
Lenz-Laborglas GmbH & Co. KG
Packaging information:
Weight:
0.03 kg
Description
Made of DURAN® tubing. With valve stopcock for dosing, with glass olive (angle: 90°).
Properties
| Built-in length: | 150 mm |
|---|---|
| Cone[s]: | NS14/23 |
| Manufacturer Article Number: | 05086001 |
| Material: | DURAN® tubing |
| With stopcock: | Yes |
| Ø: | 6 mm |
Skip product gallery
Air regulator Type HM-2
From
€19.70*
Boiling stones, Type A
From
€15.90*
Boiling stones behrotest®
From
€25.10*
Boiling stones, Type B
From
€13.50*
Gas inlet tubes, straight, ground glass joint, DURAN® tubing
From
€15.90*
Gas inlet tubes, bent, DURAN® tubing
From
€17.40*
Boiling stones, PTFE
From
€76.10*
Boiling chips, type Resistent
From
€26.20*
Similar products
For tubes:8mm to 15mm diameter, 6mm to 12.5mm diameterFor air-leak capillary tubes. Acts as a fine regulation valve (needle valve). Plastic body. Brass needle with fine thread.
Developed for use in preparatory work. For distillation and reflux in aqueous, neutral and alkaline solvents, even under a vacuum. Effective in even the smallest volumes of liquid and after multiple interruptions. Prevents any bumping. Natural product.
behrotest® boiling stones are made from a ceramic material. Compared to conventional boiling stones made of glass, they provide optimum protection against defervescence due to their porosity and their shape, even with badly blended samples.behrotest® boiling stones are chemically pure and guarantee unadulterated results when determining the COD, the Kjeldahl nitrogen etc.
Specifically for analytical work. Can be used for distillation in a clean, neutral and basic environment. Not suitable for vacuum distillation. Effective in the smallest amounts of liquid, also after multiple distillations. Prevents " bumping". Ceramic product with relatively high level of purity and abrasion resistance.
Made of DURAN® tubing. Straight air leak tubes, built-in length: 200mm, with NS cone and thin capillary (easily to draw by burner).
Made of DURAN® tubing. Bent air leak tubes (angle: 90°), built-in length: 250mm, with NS cone and thin capillary (easily to draw by burner).
Prevents bubbling and bumping when boiling a medium.Long lifeUniversal chemical resistanceOperating temperature -200 °C to 250 °C
Developed for preparatory and analytical purposes. Suitable for biochemistry, biotechnology, microbiology, microanalysis. Can even be used in strong acids and alkalis, and in all solvents and oxidants. Suitable for vacuum and high-vacuum distillation. Reduces distillation times in rotary evaporators. No abrasion, absorption of substances or solvents. Softening (evaporation) occurs at 2500°C. Can be sterilised by dry heating. Effective in even the smallest volumes of liquid, even after multiple interruptions. Prevents any bumping. Highly resistant.