Immersion circulator MX
PolyScience
Product number:
6522208
Manufacturer:
PolyScience
Packaging information:
Description
Immersion circulator for all kinds of water baths. It clamps securely to both straight and curved tank walls. The patented, closed housing protects the user and the heating element.
- Minimum working depth 7,5inch/19 cm
- Large LCD-display
- Display resolution 0,1 °C
- Displays actual and set point temperature simultaneously
- Integrated pump and heater protection
- Integrated over-temperature protection
- Low liquid level protection
- Included clamp for straight and curved tank walls
Properties
| Depth: | 97 mm |
|---|---|
| Dimensions (WxDxH): | 109 x 97 x 358 mm |
| Heating capacity: | 1100 W |
| Height: | 358 mm |
| IP code: | IP 31 |
| Manufacturer Article Number: | MX-CA11B |
| Max. delivery pressure: | 0.16 bar |
| Max. flow rate: | 13.5 l/min |
| Max. temperature: | 135 °C |
| Max. voltage: | 120 V |
| Min. temperature: | +10 °C |
| Power supply: | 120 V, 60 Hz |
| Power supply frequency: | 60 Hz |
| Programmable: | No |
| Temperature: | RT+10 ... 135 °C |
| Temperature addition: | RT |
| Temperature stability: | ±0,07 °C |
| Type: | MX |
| Type of auxiliary energy: | Mains connection |
| Type of display: | LCD |
| Width: | 109 mm |
| With timer: | No |
Skip product gallery
Weighting rings, O-shape, lead
From
€53.20*
Heating circulators
From
€1,690.00*
Weighting rings, C-shape, lead
From
€61.80*
Test tube racks for heating and refrigerated circulators MAGIO™/DYNEO™/CORIO™
From
€99.00*
Heated circulating bath with stainless steel tank Optima™ T100-ST series
From
€1,379.00*
Heating circulator bath DYNEO™ DD-BC
From
€3,032.00*
Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™
From
€60.00*
Immersion circulator CORIO™ C
From
€865.00*
Thermostatic controller Optima™ TC120
From
€1,310.00*
Thermostatic baths with polycarbonate tanks
From
€1,520.00*
Similar products
LAB-Rings to stabilise glassware and plasticware on shakers or to immerse in water baths. Vinyl-coated lead rings will not mark or scratch benchtops and labware.
Good things come in small packages! Thanks to their low bath volumes the models CC-104A und KISS-104A (with polycarbonate bath) as well as the CC-202C and KISS-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16 x 1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump. The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the KISS models. Models CC-202C and KISS-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and KISS-104A the cooling coil is an optional extra.Temperature range
CC-104A/KISS-104A:
CC-202C/KISS-202C:
(15) 25 to 100 °C
(-30) 45 to 200 °CTemp. Stability to DIN 12876
CCmodels:
KISS models:
0.02 K
0.05 KSafety class:FL, IIIBath depth:150 mmHeating capacity:2 kW
LAB-Rings to stabilise glassware and plasticware on shakers or to immerse in water baths. Vinyl-coated lead rings will not mark or scratch benchtops and labware.
Test tube racks made of stainless steel.Suitable for heating circulators with the bath types BC4, BC6, B5, BT5 and refrigerated circulators with the bath types 200F, 201F, 300F, 310F, 450F.
Universal use with precise temperature control for simple applications in a setting range from 0 to 100 °C.3 programmable temperature presetsLow liquid protection and fixed over temperature cut-outVisual alarm in case of malfunctionsClear, bright, 4 digit LED displayThermostat can be used in combination with any other Grant stainless steel tank or with a T-CLAMP with any vertical sided tankScope of supply: Thermostat, bridge plate, stainless steel tankFor cooling below ambient temperature, please order cooler separately.
For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.
Test tube racks made of plastic.Suitable for heating thermostats CORIO™ C and CD with the bath types B13, B17, B19, BT19, B27, BT27, B33.
The immersion circulator CORIO™ C is the basic model of the CORIO™ circulator portfolio. The bath attachment clamp is included in delivery and facilitates mounting of the circulator on any bath tank up to 30 litres.Precise temperature controlFor internal standard applicationsBright, white, easy-to-read displayEasy operationFor bath tank up to 30 litresTimer: 0 to 999 minClass I (NFL) according to DIN 12876-1
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The general purpose heating circulator offers excellent temperature stability and uniformity.Clear, bright 4 digit LED display3 programmable temperature pre-setsVisual and audible alarmTimer from 1 min to 99 h 59 min2 point recalibrationAdjustable over temperature cut-outPump for external circulationFor use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.Models with clamps available on request.
The transparent polycarbonate baths are suitable for use up to 100°C. An immersion thermostat is mounted on the bath bridge for all models. With a pump adapter, this combination can also be used with external, closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.Temperature max.:100 °CTemp. Stability at 70 °C to DIN12876KISS E:
CC-E:0.05K
0.02KSafety class:FL, IIIBath depth:150mm