KPG stirrer shafts, DURAN®, WS 10
Product number:
9197314
Manufacturer:
DWK Life Sciences GmbH (Duran)
Packaging information:
Weight:
0.05 kg
Description
DURAN®. Interchangeable. Bearing surface ground and polished. Suitable to be used with flasks with an internal neck diameter of 25 mm or greater.
Properties
| Length: | 440 mm |
|---|---|
| Manufacturer Article Number: | 245838601 |
| Material: | Boro 3.3 |
| Stirring rotor Ø: | 10 mm |
Skip product gallery
From
€92.40*
Other customers also bought
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
KPG stirrer shafts, DURAN®, WG 10
DURAN®. Interchangeable. Bearing surface ground and polished. Suitable to be used with flasks with an internal neck diameter of 60 mm or greater.
Skip product gallery
Stirrer Bearings, PTFE
From
€40.40*
Stirrer bearings with dynamic double seal
From
€291.40*
Stirrer bearings with GL male thread, DURAN® tubing
From
€61.00*
Stirrer bearings with cooling jacket, DURAN® tubing
From
€181.90*
Glass Stirrer Bearings, PTFE
From
€66.30*
KPG stirrer shafts, DURAN®, WG 10
From
€92.40*
KPG stirrer bearings, DURAN®, with NS cone
From
€78.10*
Stirrer with stirrer bearings, DURAN® tubing
From
€264.80*
Similar products
The sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks, the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stainless steel, glass and BOLA Stirrer Shafts.
Stirrer bearings for applications under vacuum or under slight overpressure. With extended guidance for reduced vibrations and a longer lifetime. Material: borosilicate glass 3.3 (closure), PTFE (sealings)
Made of DURAN® tubing. Other materials used: PTFE (bearing), silicone (gasket) and stirrer guides, GL male thread. Cone size 29/32. Guide bore 10mm i.d.
Made of DURAN® tubing. Stirrer bearings with NS cone and cooling water connections (thread GL14), bearing surface ground and polished.
Combination of a borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made of PPS. The special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stirrer shafts made of stainless steel, glass and for BOLA Stirrer Shafts.
DURAN®. Interchangeable. Bearing surface ground and polished. Suitable to be used with flasks with an internal neck diameter of 60 mm or greater.
Interchangeable. Bearing surface ground, polished.
Made of DURAN® tubing. For round bottom flasks 250 to 2000ml. Stirrer shaft, with PTFE stirrer blade and fixing screw. Seals vacuum stirring apparatus gas-tight to 10-3 mbar up to a permanent load of 800rpm.