Compact handheld durometer for plastics with digital display.Measurement of penetration depth (Shore)Material thickness of the sample, min. 6 mmParticularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 48-4 are not possible because of very narrow standard tolerancesCan be attached to the test stands TI-ACL (for Shore A and Shore 0) and TI-DL (for Shore D)Large display with backlightSelectable: AUTO-OFF function or continuous operation, charge indicatorDelivered in a hard carrying caseShore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materialsShore 0: foams, spongesShore D: plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.

Robust Push/Pull force gauge for simple measurement.Turnable display: automatic direction identificationSecure operability due to ergonomic designPeak-hold function to capture peaks (value is "frozen" for approx. 10 seconds) or Track function mode for a continuous measurement indicationSelectable measuring units: N, lb, kg, ozAuto-Power-OffCan be mounted on all SAUTER test stands

The texture analyser is a testing device for determining the physical properties of a wide range of substances and materials. Among other things, the elasticity, adhesion, and strength of materials can be determined. Customised methods can be programmed and saved in the TX-900. Measurements are displayed directly as curves on the large colour touchscreen. Measurement results can be exported and saved on a USB stick.Large selection of different test specimensDisplay settings: Force, speed, distance, time, temperature, measuring sensor, force sensorUnits: Gram or NewtonMeasurement modes: Penetration, compression, traction, relaxation, TPA cyclePT100 probe for temperature measurement from -50 to 300 °CSpeed adjustable from 0.1 to 10 mm/sRS232 and USB interface

Absorbent paper strips for the removal of excess liquids, e.g., from microscope specimens (100 x 50 sheets).

The texture analyser TX-700 is a testing device for determining the physical properties of various substances and materials. E.g. the elasticity, the adhesiveness and the strength of substances can be measured. The TX-700 is ideal for your consistent, elastic and adhesive products.Wide selection of different test specimensDisplay settings: force, speed, distance, time, temperature, measuring sensor, force sensorUnits: Gram or NewtonMeasurement modes: Penetration, compression, traction, relaxation, TPA cycleIncludes PT100 probe for temperature measurement from -50 to 300 °CSpeed adjustable from 0.1 to 10 mm/sRS232 and USB interface

Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSEdge sensor for low image errors or vignettingAdjustable polariser for reflective objectsExtended Depth of Field (EDOF)Extended Dynamic Range (EDR)Automatic Magnification Reading (AMR)Flexible LED Control (FLC)Long Working Distance (LWD)Wireless operation with adapter WF-20 (optional)

Live images can be created wirelessly in connection with the iOS app, Android app or with the DinoCapture 2.0 software for Windows.For microscopes AF4x15 seriesStable image transmissionLong battery life (more than 2,5 hours)Scope of supply:WiFi streamer, user manual, mini USB charging cable, integrated Li-Ion battery

Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSLED lights switchable (UV 395 nm, IR 940 nm)

Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSEdge sensor for low image errors or vignettingAdjustable polariser for reflective objectsExtended Depth of Field (EDOF)Extended Dynamic Range (EDR)Automatic Magnification Reading (AMR)Flexible LED Control (FLC)Wireless operation with adapter WF-20 (incl.)

Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSWireless operation with adapter WF-10LED lights switchable (UV 375 nm)

Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSEdge sensor for low image errors or vignettingAutomatic Magnification Reading (AMR)Flexible LED Control (FLC)

Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSEdge sensor for low image errors or vignettingAdjustable polariser for reflective objectsExtended Depth of Field (EDOF)Extended Dynamic Range (EDR)Automatic Magnification Reading (AMR)Flexible LED Control (FLC)Long Working Distance (LWD)

Versatile, portable gloss meter designed for fast and accurate measurement of low, medium or high gloss levels of coatings, plastics and related materials. The device is also suitable for large-scale uniformity checks in continuity mode.Basic, statistical and continuous measurement methodsDisplay of 5 data rows including storage capacity of more than 5000 data setsTFT 3.5 inch, capacitive touchscreenIntuitive, integrated software with icon guideUSB and RS 232 interfacesSupports ASTM D523, ASTM C584, ASTM D2457, BS3900 D5, DIN 67530, DIN EN ISO 2813, EN ISO 7668 and JI Z 8741 standardsScope of supply: Gloss meter, OnGloss software (PC), calibration plate, USB cable, external DC power supply, user manual (USB stick), carrying case, batterySpecificationsMeasuring angle:20° / 60° / 85°Measuring range:20°: 0 ... 2000 GU 60°: 0 ... 1000 GU 85°: 0 ... 160 GUResolution:0.1 GUEnvironmental conditions:0 ... 40 °C, 85% RHDimensions (W x D x H):160 x 75 x 90 mmWeight:350 gPower supply:3200 mAh Li-ion batteryStorage:Basic Mode: 1000 Statistical Mode: 5000 Continuous Mode: 5000

An extremely powerful yet affordable Polarization microscope for Transmitted light samples. Designed for the examination of birefringent samples from petrography and mineralogy, and can also be used for the synthetic materials in industry.Infinity Optics [CCIS®]Observation Tube Siedentopf Type, Trinocular-/Phototube 30°, F.N. 20Interpupillary Distance 55-75 mmEyepieces High-Eyepoint N-WF 10x/20 mm with dioptre adjustment on both eyepieces and rubber eyecupsRotatable analyzer 360°, Bertrand lens 0,5X and slot for compensatorsReversed quadruple revolving nosepiece, single centrable positionsObjectives CCIS® EC Plan Achromatic Strain-free 4x, 10x, 40x-S, 60x-S360° circular rotating stage, 160 mm diameter, 1° increments, 0,1°vernier scale and lockableAchromat swing-out condenser N.A. 0.90/0.13 (strain-free) with iris diaphragm and rotatable polarizerKoehler illumination quartz halogen 6V/30 W with intensity controlUniversal power supply 100-240 V (CE)Empty insertion plate, blue filter, power cord, Allen hexagonal key, vinyl dust cover and spare fuse

The AE2000 MET series is the ideal microscope for industrial quality inspection and material science. Different objective options allow applications in brightfield & darkfield or examination of larger samples.Infinity Optics [CCIS®]Observation Tube Siedentopf Type, Trinocular-/Phototube 45°, F.N. 20, 360° swivellingInterpupillary Distance 48-75 mmEyepieces High-Eyepoint N-WF 10x/20 mm with diopter adjustment on both eyepieces and rubber eyecupsSide facing quintuple nosepieceObjectives CCIS LM Plan achromat DIN 5X, 10X, 20X, 50XM32 with adapters to W 4/5" x 1/36" (RMS standard)Mechanical stage 280 x 192 mm surface with metal round and oval stage insertsX and Y range of 50 x 50 mmExternal lamphouse, Illumination 12 V/100 W halogen with intensity control and sleeping modeUniversal power supply 100-240 V (CE)Blue filter, Allen hexagonal key, vinyl dust cover and power cord

Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSAdjustable polariser for reflective objectsLong Working Distance (LWD)

The BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust coverCoaxial course and fine focusing system, course focusing system adjustableTransmitted illumination of 6V/30W Quartz Halogen Koehler illumination with intensity controlBlue, frosted, green and yellow filtersInterchangeable LED modul for transmitted light available

The BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust coverThe BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust cover

Content: 1 power blower, cleaning liquid, cleaning cloth, retractable brush

Powerful polarisation microscope for all material sciences. Maximum flexibility for all applications in polarisation microscopy, suitable for transparent as well as opaque samples from the education sector and industrial quality assurance.Tube type Siedentopf, swivelingWidefield oculars for spectacle wearers with diopter adjustment on both ocularsCCIS® Plan achromatic objectives UC PL (strain-free)Reversed coded nosepiece with single centering holesBertrand lens and slot for compensatorsFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.90/0.13 (strain-free) and rotatable polariserIllumination acc. to Köhler, with interchangeable illuminatorMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorCoaxial coarse and fine focusing system with tension adjustmentCompact, built-in mechanical stageIntegrated power supply with sleep modeVisual camera outputUSB 2.0 for external camera powerScope of supply: Microscope, dust cover, power cord, Allen key, blue filter, halogen bulb, LED module, adjustable key for nosepiece, interference color chart, screws for metal extension support

Incident and transmitted light microscopes for science materials, inspection of semiconductor components, LCD displays and wafers, equipped with an intelligent brightfield / darkfield illumination concept. The microscope models with additionally integrated LED transmitted light expand the application options in the direction of complex composite materials.Tube type Siedentopf, swivelingWidefield oculars for spectacle wearers with diopter adjustment on both ocularsCCIS® Plan Achromat & S-APO (PB free), DIN objectivesReversed coded nosepieceLED incident light illuminator with field and aperture diaphragm, with slots for polariser / analyser slidersWith interchangeable illuminationMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorCoaxial coarse and fine focusing system with tension adjustmentIntegrated power supply with sleep modeUSB 2.0 for external camera powerAdditional equipment depending on the model with bright field (transmitted light), segmentable dark field (reflected light), polarization (reflected light)Scope of supply: Dust cover, power cord, allen key, screws for metal extension support

Pen type hardness testing device in accordance with Leeb testing for mobile hardness testing of metals.LCD displayAll measurement directions possible (360°) thanks to an automatic compensation functionInternal impact sensor (Type D)Internal memory for up to measurements with date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL)Rechargeable battery operationData interface USBScope of supply:Leeb hardness tester, carrying case, USB interface cable, mains adapter

Portable Leeb hardness tester for professional applications.Innovative touchscreenAutomatic recognition of the impact (rebound) sensor connected to the HMOAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to measurementsMini statistics function: Displays the measure value, the average value, the difference between the maximum and minimum values, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsRechargeable battery operationUSB interface for connection to the printer and charging the batteriesScope of supply:Leeb hardness tester, carrying case, standard block, mains adapter

Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness valuesAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsAUTO-OFF function, battery level indicatorScope of supply:Leeb hardness tester, external impact sensor, standard block for calibration (approx. 790 ± 40 HL), carrying case

Compact handheld durometer for plastics with drag indicator.Measurement of penetration depth (Shore)Material thickness of the sample, min. 6 mmParticularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 48-4 are not possible because of very narrow standard tolerancesCan be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)Max mode: Holds the maximum value in the displayPoint mode: Shows one instant valueScrews to screw on to the TI: M7 fine threadDelivered in a plastic carrying caseShore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materialsShore A0: foams, spongesShore D: plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.

Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values.External impact sensor (Type D) includedAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionStandard block for calibration included (approx. 790 ± 40 HL)Internal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsDelivered in a hard carrying caseWireless IR printer included for on-site printing of measurement protocols (battery operated)

The Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.External impact sensorAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 600 data groupsMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmedAcoustic and visual signalMatrix display: Backlit multi-function displayRobust metal housingScope of supply:HK-D: Mobile Leeb hardness tester, hard carrying caseHK-DB: Mobile Leeb hardness tester, hard carrying case, standard block for calibration, hardness approx. 800 HLD

For torque testing of bottles and other packaging with screw tops. Quick pin system: The four bottle mounts are pushed in, instead of being screwed in, to save time. This allows you to reconfigure quickly for other bottle sizes.Can be used in both directions of rotationMetal housingCapacity display: A bar lights up to show how much of the measuring range is still availablePeak hold mode to capture peaksFunction to set limits: Input of an upper/lower limit valueVisual and acoustic signalAUTO-OFF functionBack-lit LCD graphic displayInternal data memory saves up to 500 measurementsMemory contents can be transferred to the PC using optional softwareUSB and RS 232 data interfacesRubber feet with anti-slip featureScope of supply: Digital torque measurement, four bottle mounts with rubber coat, sturdy carry case

For checking the authenticity of gold bars and coins. The SAUTER SSG software can be used to calculate the sound velocity for various precious metal alloys. This makes it possible to determine whether coins or ingots contain false cores or whether they consist of one and the same material.Selectable measuring units: mm, inchInternal memory for up to 20 files (with up to 100 values per file)Battery operationAUTO-OFF functionData interface USBScope of supply:Ultrasonic material thickness gauge, base plate for adjustment, carrying case

For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, base plate, calibration foils, carrying case