Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with LCD display

Shelves made of stainless steel, perforated.If you are ordering replacement shelves, please provide the serial number prior to ordering, since it might be necessary to order other shelves with different dimensions.

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with LCD display and enhanced timer functionsAdjustable fan speedEthernet interface

Microprocessor controlled universal drying oven with forced convection including two shelves. Each shelf of the uniOVEN 42 and uniOVEN 110 has a load capacity of 20 kg, the total load capacity of each unit is 50 kg. The maximum number of shelves is 7 for uniOVEN 42 and 10 for uniOVEN 110 with a distance of 40 mm between shelves.Quick and intuitive operationMicroprocessor control with integrated auto-diagnostic systemForced convection with fanDigital display for time and temperatureTimer: 1 minute to 99.9 h and continuousDelayed start timer: 1 minute to 99.9 hOutlet for vapour exhaustionAcoustical and visible information for end of programAcoustical and optical alarm at temperature differencesInterior made of stainless steelAdjustable over temperature protection at 300 °CTemperature accuracy: ±1 °C (at 70 °C)Temperature uniformity: ±2 °C (at 70 °C)Scope of supply: LLG-uniOVEN incl. 2 shelves

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convectionController with LCD display

Robust, space-saving, low-profile ovens with mechanical and adjustable chamber ventilation.Uniform drying conditions thanks to APT.line™ technologyIdentical test conditions throughout the chamber interior independent of sample size and quantityOutstanding thermal insulationHydraulic thermostat temperature controlAdjustable exhaust air flapTimer 0 to 120 min2 chrome-plated racks

The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Forced air circulationTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.Easy handlingAccurate temperature controlSimple and ergonomic door openingAPT.line™ preheating chamber technologyAdjustable exhaust air flapController with timer functionClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convection for homogenous temperature distribution.

A safety drying oven from BINDER ensures the perfect test result of your solvent-based paints and coatings, absolute temperature precision even with high ventilation.Defined solvent quantity according to EN 1539Electronically controlled APT.line™ preheating chamber technologyIndependent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarmRS 422 interface for use with APT-COM™ DataControlSystem communication softwareFresh-air monitoring with audible and visual alarm and automatic deactivation of heatingController with time-segment and real-time programmingEasy replaceable fresh air cartridge ensures constant fresh air qualityStandard door gasket made from solvent-resistant FKM for use at up to 200 °C2 chrome-plated racks

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.Uniform drying conditions thanks to APT.line™ preheating chamber technologyIdentical test conditions throughout the chamber interior independent of sample size and quantityAdjustable exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with timer functions

The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Forced air circulationSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com

Thermo Scientific™ Heratherm™ General Protocol ovens are perfect for routine daily work, providing the ideal heating and drying solution for your applications.Low energy consumptionBuilt-in timerExcellent footprint/volume ratioInner chambers made from corrosion-resistant stainless steel with rounded corners for easy cleaningLarge, easy to view vacuum fluorescent displaySimple, microprocessor-based touch button controlsDoors can be opened over 180° making these units easy to accessAutomatic overtemperature alarm system to protect samplesThe exhaust vent can be used as an access port for an external temperature sensorOvens come standard with a RS232 data interfaceModels with gravity convection are designed to protect delicate samples while offering temperature uniformity of ±4 °C with temperature stability of ±0.4 °C at 150 °CLockable casters for easy mobility and stability (floor models only)

Full-sight glass door (4-layer insulating glass) temperature-range up to max. 250°C, for UN, UNplus, UF, UFplus series.Full-sight glass door (4-layer insulating glass borsilicat) temperature-range up to max. 300°C upon request

The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Natural convectionTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

Grid shelf incl. shelf support.

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.Uniform drying conditions thanks to APT.line™ preheating chamber technologyIdentical test conditions throughout the chamber interior independent of sample size and quantityAdjustable exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convectionController with timer functions

The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Natural convectionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.Uniform drying conditions thanks to APT.line™ preheating chamber technologyIdentical test conditions throughout the chamber interior independent of sample size and quantityAdjustable exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with expanded timer functionsAdjustable fan speedRS 422 interface

The Thermo Scientific™ Heratherm™ Advanced Protocol Security portfolio combines the benefits of the Advanced Protocol line with an extra layer of security for applications where process reliability and sample protection are paramount.Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clockHighest level of temperature uniformityExceptionally low energy consumptionAdjustable fan speed for application related airflowProgrammable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)Access port allows the introduction of sensors for independent data monitoringA simple calibration routine ensures temperature accuracy over timeBoost function enables rapid heating upAuto-dry function deactivates oven when the samples are dry, saving energy (optional sample temperature sensor is required to utilize this feature)Standard overtemperature alarm and an additional undertemperature alarmDoor lock prevents disruption, tampering or accidental openingDoor alarm notifies the operator when door is left open accidentallySocket for independent sample sensor (option): When connected, exact sample temperature is shown on display for additional peace of mindThe Thermo Scientific™ Heratherm™ Advanced Protocol Security portfolio combines the benefits of the Advanced Protocol line with an extra layer of security for applications where process reliability and sample protection are paramount.Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clockHighest level of temperature uniformityExceptionally low energy consumptionAdjustable fan speed for application related airflowProgrammable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)Access port allows the introduction of sensors for independent data monitoringA simple calibration routine ensures temperature accuracy over timeBoost function enables rapid heating upAuto-dry function deactivates oven when the samples are dry, saving energy (optional sample temperature sensor is required to utilize this feature)Standard overtemperature alarm and an additional undertemperature alarmDoor lock prevents disruption, tampering or accidental openingDoor alarm notifies the operator when door is left open accidentallySocket for independent sample sensor (option): When connected, exact sample temperature is shown on display for additional peace of mind

Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.Easy handlingAccurate temperature controlSimple and ergonomic door openingAPT.line™ preheating chamber technologyAdjustable exhaust air flapController with timer functionClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convection for homogenous temperature distribution.

As well as incorporating all the benefits of Thermo Scientific™ Heratherm™ General Protocol ovens, the Heratherm™ Advanced Protocol range boasts additional features providing even more flexibility, accuracy and dependability.Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clockHighest level of temperature uniformityExceptionally low energy consumptionAdjustable fan speed for application related airflowProgrammable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)Access port allows the introduction of sensors for independent data monitoringA simple calibration routine ensures temperature accuracy over timeBoost function enables rapid heating upAs well as incorporating all the benefits of Thermo Scientific™ Heratherm™ General Protocol ovens, the Heratherm™ Advanced Protocol range boasts additional features providing even more flexibility, accuracy and dependability.Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clockHighest level of temperature uniformityExceptionally low energy consumptionAdjustable fan speed for application related airflowProgrammable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)Access port allows the introduction of sensors for independent data monitoringA simple calibration routine ensures temperature accuracy over timeBoost function enables rapid heating up

As well as incorporating all the benefits of Thermo Scientific™ Heratherm™ General Protocol ovens, the Heratherm™ Advanced Protocol range boasts additional features providing even more flexibility, accuracy and dependability.Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clockHighest level of temperature uniformityExceptionally low energy consumptionAdjustable fan speed for application related airflowProgrammable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)Access port allows the introduction of sensors for independent data monitoringA simple calibration routine ensures temperature accuracy over timeBoost function enables rapid heating upAs well as incorporating all the benefits of Thermo Scientific™ Heratherm™ General Protocol ovens, the Heratherm™ Advanced Protocol range boasts additional features providing even more flexibility, accuracy and dependability.Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clockHighest level of temperature uniformityExceptionally low energy consumptionAdjustable fan speed for application related airflowProgrammable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)Access port allows the introduction of sensors for independent data monitoringA simple calibration routine ensures temperature accuracy over timeBoost function enables rapid heating up

As well as incorporating all the benefits of Thermo Scientific™ Heratherm™ General Protocol ovens, the Heratherm™ Advanced Protocol range boasts additional features providing even more flexibility, accuracy and dependability.Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clockHighest level of temperature uniformityExceptionally low energy consumptionAdjustable fan speed for application related airflowProgrammable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)Access port allows the introduction of sensors for independent data monitoringA simple calibration routine ensures temperature accuracy over timeBoost function enables rapid heating upAs well as incorporating all the benefits of Thermo Scientific™ Heratherm™ General Protocol ovens, the Heratherm™ Advanced Protocol range boasts additional features providing even more flexibility, accuracy and dependability.Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clockHighest level of temperature uniformityExceptionally low energy consumptionAdjustable fan speed for application related airflowProgrammable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)Access port allows the introduction of sensors for independent data monitoringA simple calibration routine ensures temperature accuracy over timeBoost function enables rapid heating up

Thermo Scientific™ Heratherm™ General Protocol ovens are perfect for routine daily work, providing the ideal heating and drying solution for your applications.Low energy consumptionBuilt-in timerExcellent footprint/volume ratioInner chambers made from corrosion-resistant stainless steel with rounded corners for easy cleaningLarge, easy to view vacuum fluorescent displaySimple, microprocessor-based touch button controlsDoors can be opened over 180° making these units easy to accessAutomatic overtemperature alarm system to protect samplesThe exhaust vent can be used as an access port for an external temperature sensorOvens come standard with a RS232 data interfaceModels with mechanical convection provide a temperature uniformity of ±3.3 °C with temperature stability of ±0.3 °C at 150 °C.

With their maximum working temperature of 300 °C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Models TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and control

Powerful drying cabinets with rapid heating and exact temperature regulation guarantees reproducible results. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions, operating costs, and ensures excellent temperature uniformity.Electronically adjustable ventilationKey lock functionTimer from 1 minute up to 100 daysAdjustable temperature limitUSB InterfaceFor up to 6 shelvesInterior made of stainless steelDoor opening possible up to max. 180°OVEN basic dry with natural convection up to 250 °CClear LED display and control menuScope of supply: Oven with 2 shelves and calibration certificate at 160 °C

Powerful drying cabinets with rapid heating and exact temperature regulation guarantees reproducible results. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions, operating costs, and ensures excellent temperature uniformity.Electronically adjustable ventilationKey lock functionTimer from 1 minute up to 100 daysAdjustable temperature limitUSB InterfaceFor up to 6 shelvesInterior made of stainless steelDoor opening possible up to max. 180°OVEN basic dry with natural convection up to 250 °CClear LED display and control menuScope of supply: Oven with 2 shelves and calibration certificate at 160 °C

Powerful drying cabinets with rapid heating and exact temperature regulation guarantees reproducible results. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions, operating costs, and ensures excellent temperature uniformity.Electronically adjustable ventilationKey lock functionTimer from 1 minute up to 100 daysAdjustable temperature limitUSB InterfaceFor up to 6 shelvesInterior made of stainless steelDoor opening possible up to max. 180°OVEN control dry with recirculating air up to 300 °CRecirculating air drying cabinet with automatic fan switch-offRecirculating air adjustable in 10 stepsReal-time clockTemperature selection limited TWB (DIN 12880)Illuminated interiorCable bushing at the rear for measurings inside the ovenRS 232 InterfaceDirect saving of data on USB stickInterface for additional temperature sensor (display and control possible)2 large TFT DisplaysScope of supply: Oven with 2 shelves and calibration certificate at 160 °C

Safer than disinfection, hot-air sterilisation of containers and instruments.The safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.Textured stainless steel housing, rear of zinc-plated steel, intuitively operated TwinDISPLAY(TFT colour display) with touchscreenYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB and mechanical temperature limiter TB acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm

Type E3(x): standard, stainless steel wire (max. loading: 30kg)Type E0(x): perforated stainless steel shelves (max. loading: 30kg)B-Class = UNB / UFB / INB / SNB / SFBE- and P-Class = UNE / INE / IFE / SNE / SFE / UNP / UFP / INP / IFP / SFPAdditional stainless steel shelves are available on request

Max. load per rack 70 kg.