Sound level meter class I and II

For reliable control and evaluation of indoor air quality. Simultaneous measurement and display of temperature, CO2 concentration and humidity. The CO2 concentration in the air is additionally indicated by three LEDs as good, medium or bad.Alarming when limit is exceededLarge, illuminated displayFactory calibration certificateScope of supply: Room climate monitor RM 100, external AC/DC adapter

The climate measuring instruments testo 440 combine the benefits of a compact handheld device with intuitive measurement menus and a comprehensive selection of air velocity & IAQ probes. Both the digital Testo Smart Probes and numerous Testo temperature probes can be connected. Clearly structured menus for measuring volume flow in ducts/at outlets, degree of turbulence, cooling/heating load, mould indication and logging mode are stored on the instrument.The testo 440 dP also has an integrated differential pressure sensor. This makes measurements at filters as well as Pitot tube and K-factor measurements possible.USB interface for data export and optional printout of measuring valuesUp to 3 probes can be connectedParallel display of 3 measuring valuesBluetooth probes for measuring convenience and easy storage in the caseUniversal handle for all probesMeasurement of the following parameters are possible: °C, % r.h., CO, CO2, m/s, Lux, hPaPlease order probes separately.SpecificationsTemperature measuring range (NTC):-40 ... +150 °CAccuracy:±0.4 °C (-40 ... -25.1 °C) ±0.3 °C (-25 ... +74.9 °C) ±0.4 °C (+75 ... +99.9 °C) ±0.5 % of measured value (remaining range)Resolution:0.1 °CTemperature measuring range (TE Typ K):-200 ... +1370 °CAccuracy:±(0.3 °C + 0.3 % of measured value)Resolution:0.1 °CDifferential pressure measuring range testo 440 dP:-150 ... +1500 hPaAccuracy:±0.05 hPa (0 ... +1.00 hPa) ±0.2 hPa + 1.5 % of measured value (+1.01 ... +150 hPa)Resolution:0,01 hPaMemory:7500 measurement protocolsOperating / storage temperature:-20 ... +50 °CDimensions (W x D x H):65 x 32 x 154 mmWeight:250 gPower supply:3 x Mignon, Type AA

Sound level meter for noise measuring.Delivered in a hard carrying caseMulti measuring functions: Lp: Standard sound level measuring function, Leq: Energy equivalent sound level measuring mode (type A), Ln: Shows the deviation from a pre-defined limit in %Selectable methods of evaluation: A: As sensitive as the human ear, C: Sensitive for noisier environmental, conditions, where there are machines, plant, motors etc., F: For areas where sound intensity does not varyFunction to set limits: Programmable target value for go/no-go test valuesTrack function for continuous recording of variable environmental conditionsPeak Hold Mode to capture peaksInternal memory for measured values, for 30 measurements. Can be displayed on the PCData interface RS-232, included

Temperature probes with TC plug type K.

Quick and easy-to-use instrument for measuring lighting conditions in the workplace. The sensor is adapted to spectral sensitivity of the eye.Display illuminationHold-functionMax./min. valuesScope of supply: Meter incl. protection cap, batteries, calibration protocolSpecificationsMeasuring range:0 to 99999 lxResolution:1 lx (0 to 19999 lx) 10 lx (remaining range)Accuracy:±3 lx or ±3 %Measuring frequency:0.5 sDimensions (W x D x H):133 x 46 x 25 mmWeight:95 gIP code:IP 40Power supply:2 Micro cells AAA

Globe thermometer for measuring radiant heat acc. to ISO 7243, ISO 7726, DIN EN 27726, and DIN 33403.

Suitable for measurements in corrosive media. Ideal for use in laboratory and industry. Precise Pt100 sensor with replaceable glass coating and fixed cable.

Digital probes with intelligent calibration concept. All probe heads can be easily attached to the universal handle.

Light measuring instrument for precise light measurement up to 200,000 LuxMeasures illumination in the workplaceHelps to determine whether a workstation has insufficient light or whether there is too much lightPhoto sensor: silicon diodeCosine correction for angular incident lightSturdy protective cover for the photo sensorIncreased service life: Impact protection through a protective casingTrack function for continuous recording of variable environmental conditionsPeak Hold Mode to capture peaksSelectable measuring units: fc (foot-candle), lxAUTO-OFF functionDelivery in a robust box

Ideal for monitoring air quality in rooms. LED lights in traffic light colours below the display provide information about the current CO2 content in the air (green: <800 ppm, yellow: 800 to 1200 ppm, red: >1200 ppm).Display of temperature and humidityAdjustable alarmScope of supply: CO2 meter, power adapter, operating instructionsSpecificationsCo2 range:0 ... 3000 ppmResolution:1 ppm (0 ... 1000 ppm); 5 ppm (1001 ... 2000 ppm); 10 ppm (2001 ... 3000 ppm)Temperature range:0 ... 50 °CResolution:0,1 °CRelative humidity:20 ... 90 % R.H.Resolution:1 % R.H.Dimensions (W x D x H):138 x 51 x 100 mmWeight:188 gPower supply:USB or 5 VDC adapter

Laboratory kit with Pt100 probe for reliable and precise temperature measurement and documentation. Particularly suitable for use in corrosive media due to the laboratory probe, whose coating is made of the tried-and-tested DURAN®laboratory glass. The testo 440 air velocity & IAQ measuring instrument automatically detects the connected probes, and the stored, structured measurement menus makes work considerably easier in a wide variety of applications. For example it can be used to optimally adjust air conditioning and ventilation systems.Structured measurement menu for long-term measurementsInternal data storage and USB port for flexible data exportParallel connection of up to three probes possible: one Bluetooth® probe, one wired probe and one temperature probe with thermocouple type K connectionVersatile, expandable with an extensive selection of digital probesScope of supply: Climate measuring instruments, 3x AA batteries, USB cable and calibration protocol, glass-coated digital Pt100 laboratory probe, basic case for testo 440 and 1 probeSpecificationsTemperature measuring range (NTC):-50 ... +400 °CAccuracy:±0.3 °C (-50 ... 300 °C) ±0.4 °C (300.01 ... 400 °C)Resolution:0.01 °CMemory:7500 measurement protocolstesto 440Operating / storage temperature:-20 ... +50 °CDimensions (W x D x H):65 x 32 x 154 mmWeight:250 gPower supply:3 x Mignon, Type AAPt100 probeOperating / storage temperature:-5 ... 45 °C / -20 ... 60 °CCable length:1.6 mDimensions (L x Ø):200 x 6 mmWeight:160 g

Large displayMeasuring range: 0 to 3000 ppmIncl. Power supply for 230 VAC24-hour data loggerAdjustable Alarm°C/°F-selectableRelay output for ventilation controlApplications: Ideal for monitoring the environment (CO2 concentration) in public buildings, such as universities, schools, for e.g. Hospitals, Education, Office, Production Plants, Public Facilities.SpecificationsCO2 range:0 ... 3000ppmResolution:1ppm (0 up to 1000ppm); 5ppm (1000 up to 2000ppm); 10ppm (2000ppm)Accuracy:50ppm or 5%, larger value appliesTemperaturerange:0 ... +50°CResolution:0,1°CAccuracy:±1% or 1°C, larger value appliesDisplay:7 segment LCD(twin-lined)Housing:Plastic (ABS)Supply requirements:230 VAC adapter or 4 x AA BatteriesDimensions:165 x 80 x 23mmWeight:600g (incl. packaging)