Splash heads acc. to Stutzer, bent, DURAN® tubing
Product number:
6522081
Manufacturer:
Lenz-Laborglas GmbH & Co. KG
Packaging information:
Weight:
0.601 kg
Description
Made of DURAN® tubing. Splash heads are directly placed onto distillation flasks for separation of drops. Bent with two cones at 75°.
Properties
| Angle: | 75 ° |
|---|---|
| Cone[s] oblique: | NS14/23 |
| Cone[s] straight: | NS14/23 |
| Manufacturer Article Number: | 05037011 |
| Material: | DURAN® tubing |
Skip product gallery
From
€3.95*
From
€7.70*
From
€3.30*
From
€6.75*
From
€2.85*
From
€16.50*
From
€27.00*
From
€25.80*
From
€46.90*
From
€2.50*
From
€28.20*
Accessories
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Otto Fahsig GmbH
Otto Fahsig GmbH
Gas leak detection fluid, bottle
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
H W S Hans W. Schmidt
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
Bohlender GmbH
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
J.P. Pöllath
J.P. Pöllath
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
Buddeberg GmbH
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel, with set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Engler distilling flasks, DURAN®, ASTM, with beaded rim
Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405
Bohlender GmbH
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
Dr. Dietmar Glindemann
Dr. Dietmar Glindemann
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage <10-8 to 10-6 mBar l/s (vacuum and pressure)Solvent leakage from containers < 0.1 to 0.03mg/dayTemperature range: -196 to 300°C
Skip product gallery
Receiver adapters, with olives, DURAN® tubing, straight
From
€24.90*
Distilling links with Liebig condenser and vacuum receiver adapter, DURAN® tubing
From
€98.90*
Distributors for distilling receivers to Bredt, DURAN® tubing
From
€97.20*
Distilling links acc. to Claisen, with olive, DURAN® tubing
From
€97.90*
Columns acc. to Vigreux, with removable glass jacket, DURAN® tubing
From
€105.60*
Multiple adapters, 2-necks, DURAN® tubing
From
€27.40*
Receiver adapters, with GL thread, DURAN® tubing, straight
From
€35.50*
Delivery adapters, straight, with suction tube, DURAN® tubing
From
€21.70*
Bends
From
€22.10*
Receiver adapters, with olives, DURAN® tubing, bent 105°
From
€33.10*
Similar products
Made of DURAN® tubing. Acc. to DIN 12594, with NS socket and cone, with drain tip, vacuum connection: glass olive.
Made of DURAN® tubing. DIN 12596. With Liebig condenser at 75° and vertical outlet with NS cone and vacuum connection with glass olives or thread GL14. With socket NS 14/23 for distillation thermometers of 55mm built-in length.
Made of DURAN® tubing. With four cones NS 14/23, for round bottom flasks up to 250ml volume.
Made of DURAN® tubing. With Liebig condenser and Claisen head, water connection with glass olives, with two sockets NS 14/23 for distillation thermometers of 55mm built-in length.
Made of DURAN® tubing.
Made of DURAN® tubing. With two sockets and one cone.One neck 105° upwards.
Made of DURAN® tubing. Receiver adapters acc. to DIN 12594, with NS socket and NS cone, with drain tip, vacuum connection: thread GL18.
Made of DURAN® tubing. Cone and socket, straight.
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals. Suitable for the usage of assembling various reactor systems. Available in two shapes: bend with angle 75° or 90°.
Made of DURAN® tubing. Acc. to DIN 12594, with NS socket and cone, with drain tip, vacuum connection: glass olive.