Syringe Pump Legato® 270P

The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsSingle Syringe Infusion Pump. This pump is ideal for applications where a single syringe is used.

Economical Single-Syringe Infusion Pump combining precision flow with outstanding ease-of-use and exceptional durability.For single syringes from 10 µl to 60 ml, any manufacturerSimple menu-driven setup (select syringe size from displayed table, set dispense volume and flow rate)Easy to read bright, backlight displayDispense volume displayed and has automatic shutoff at completionVolume and flow rate units (µl/h or ml/h) are selected automatically based on syringe sizeLast settings stored in permanent memoryButton release of drive nut for easy syringe installationChoice of run/stop after a power interruption

The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Nanoliter Pump. This infusion only pump is ideal for applications where dual syringes are required with small volumes under 10 ml.

The simple and easy to use Legacy® pumps are a high value solution for delivering precise and smooth flow in research and production applications. The KDS 100 pump gives customers the most cost effective solution for infusing fluids. Alternatively, the KDS 200 gives advanced features with RS232 and TTL interfaces and can be daisy chained together to create a pumping network. KDS 220 holds up to 10 syringes.Vibration Elimination SystemFlow Direction IndicatorFast Forward/ReversePower Recovery DiagnosticsSyringe LibraryFlow Rate SelectionVolume Dispense ModeDirect Entry Syringe DiameterOptional: Foot Pedal Interface, NIST Certificate, AlarmKDS 100 Single-Syringe Infusion Pump: Economical pump combining precision flow with outstanding ease-of-use and exceptional durability.KDS 101 Two-Syringe Nanoliter Pump: For microdialysis and similar applications which require virtually pulseless flow at very low flow rates.KDS 200 Two-Syringe Infusion Pump: Programmable pump for daisy chain connection. Feature-laden and with a broad speed range and a wide range of syringe sizes it meets the requirements of most laboratory applications.KDS 220 Multi-Syringe Infusion Pump: For applications requiring multiple syringes. This pump has been modified to hold up to 10 syringes.* with CE Mark

Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output

Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output

Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output

Dilute with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 diluter system is a high-precision syringe pump with a graphical user interface that quickly and easily dilutes volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDual Syringe DiluterUse two syringes to create up to a 1:50,000 dilution in a single stepDrastically reducing preparation time and wasted bufferWashes the tubing between each sampleDilute with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 diluter system is a high-precision syringe pump with a graphical user interface that quickly and easily dilutes volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDual Syringe DiluterUse two syringes to create up to a 1:50,000 dilution in a single stepDrastically reducing preparation time and wasted bufferWashes the tubing between each sample

Luer Lock fitting enables compatibility to all pump syringesPressure proof up to 2 BarType Standard is available in different lengthsType Opaque (black) offers light protectionCentric Luer Lock cone3-piece syringe for infusion pumpMade of PolypropylenePlunger stopper with double sealing ring for slow aspirationHigh contrast graduation, permanent markingCentric Luer Lock coneReduced residual volumenatural latex-free

The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Infusion/Withdraw Pump. This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes. Features additional multi-step programming with user defined configurations/programs of up to 1000 steps. Up to 40 programs of 25 steps each can be stored in memory.

The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Infusion Pump. This unit supports infuse only. User definable flow rates with selectable target volumes or time values to control the total infusion volume.