Test tube atomiser, glass
Bionis SAS
Product number:
9023990
Manufacturer:
Bionis SAS
Packaging information:
Length:
177 mm
Width:
88 mm
Height:
72 mm
Weight:
0.055 kg
Description
Glass atomiser for nebulising small amounts of reagents. Atomiser can be inserted in a 12ml test tube with a ground joint and held in position with a spring clip.
Properties
| Manufacturer Article Number: | BS123.990 |
|---|---|
| Type: | Test tube atomiser |
Skip product gallery
From
€2,652.00*
From
€175.50*
From
€152.30*
Other customers also bought
Bionis SAS
Bionis SAS
Spray box with fan
For spraying TLC plates with aggressive media. Housing made of acid-resistant PVC for plates up to 200 x 200 mm. Low-noise extraction fan supplies 400 m³/h. The exhaust tube leads upwards and can be connected to NW 100 extraction tubing. Reagent droplets are collected in a separate drip tray. Size (W x D x H) 620 x 610 x 580 mm.
Bionis SAS
Bionis SAS
Chromatography sprayer SG e1
Spraying with powerful and quiet pump.The finest spray is produced even when the battery power is low. Liquids, up to the viscosity of light oil, can be finely sprayed at the touch of a button. Particle diameter 5µm to 10µm with a throughput of 20ml/min. based on water. The reservoir bottle for the spray reagent is made of borosilicate glass. The bottle is screwed into the high-grade PTFE nozzle and can be changed in seconds. With quick-charging dock as a storage base. Overload protection enables continuous storage of the sprayer in the charging station. Supplied with battery, battery charger, bottle and nozzle.
Bionis SAS
Bionis SAS
Special atomiser, with rubber blowball
With rubber blowball for nebulising reagents. Can be connected to other compressed air supplies.
Skip product gallery
UV irradiation system BIO-LINK
From
€2,157.80*
Test tube sprayers, DURAN® - tubing
From
€65.70*
Special atomiser, with rubber blowball
From
€152.30*
UV analysis lamp
From
€358.00*
TLC Viewing cabinets
From
€252.00*
Spray box with fan
From
€2,652.00*
Chromatography sprayer SG e1
From
€175.50*
ChromaJet DS 20
From
€29.00*
Similar products
Compact and powerful, ideal for a broad range of applicationsPrecise measurement and control technology, non-ageing UV sensorsChoice for irradiation parameter energy or timeEasy operation: Programme memory, storage of the last parameters, programme resumes after opening of the door, auto-restart after power failureSecure and stable construction, very easy to useEasy exchange of the UV tubes for wavelength changeDimensions (W x D x H)Housing:350 x 360 x 305 mmInterior:260 x 330 x 145 mmOther models available on request.
Made of DURAN® - tubing. Consists of a test tube with NS 14/23 or 19/26 joint neck, sprayer head, clamp and rubber bulb.
With rubber blowball for nebulising reagents. Can be connected to other compressed air supplies.
Analysis lamp with two separately switchable UV tubes of high radiation intensity. The UVA tube produces long-wave radiation at 365 nm and the UVC tube short-wave radiation at 254 nm. Ideal for chemical-analytical applications and for hygiene monitoring.Please order table stand separately.
Model CN-6:For one or two UV hand lamps model BVL-6; choice of combined wavelengths 254 nm, 312 nm and 365 nmCabinet dimensions (W x D x H): 300 mm x 280 mm x 240 mmModel CN-15:Integral high intensity UV lamps, extra large capacity; easy access also for large samples; white-light bulb for normal observationRemovable bottom panelCabinet dimensions (W x D x H): 505 mm x 415 mm x 280 mm* Other models available on request.
For spraying TLC plates with aggressive media. Housing made of acid-resistant PVC for plates up to 200 x 200 mm. Low-noise extraction fan supplies 400 m³/h. The exhaust tube leads upwards and can be connected to NW 100 extraction tubing. Reagent droplets are collected in a separate drip tray. Size (W x D x H) 620 x 610 x 580 mm.
Spraying with powerful and quiet pump.The finest spray is produced even when the battery power is low. Liquids, up to the viscosity of light oil, can be finely sprayed at the touch of a button. Particle diameter 5µm to 10µm with a throughput of 20ml/min. based on water. The reservoir bottle for the spray reagent is made of borosilicate glass. The bottle is screwed into the high-grade PTFE nozzle and can be changed in seconds. With quick-charging dock as a storage base. Overload protection enables continuous storage of the sprayer in the charging station. Supplied with battery, battery charger, bottle and nozzle.
Trace accurate spraying - economical and environment-friendly. ChromaJet DS 20 microprocessor-controlled, automatic spray chamber produces a high precision spray jet for use on thin-layer chromatography plates. Offers a choice of spray settings with memory storage for repeat use. Reagent consumption is greatly reduced. The spray programme is managed via control and editing software.Dimensions:440 x 405 x 275 mmSupply requirements:230 V 50/60 Hz