Threaded tube with NS core, DURAN® tubing
€22.00*
Content:
1
| Quantity | Unit price |
|---|---|
| To 9 |
€22.00*
|
| From 10 |
€20.00*
|
Delivery according to order confirmation
Product number:
9209559
Manufacturer:
Lenz-Laborglas GmbH & Co. KG
Packaging information:
Length:
101 mm
Width:
32 mm
Height:
30 mm
Weight:
0.023 kg
Description
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. With GL thread and NS core.
Properties
| Cone[s]: | NS29/32 |
|---|---|
| Manufacturer Article Number: | 01312529 |
| Material: | DURAN® tubing |
| Standard: | DIN 12257 |
| Thread: | GL 25 |
Skip product gallery
From
€2.25*
Other customers also bought
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Screwthread tubes for glassblowers, DURAN® tubing
Acc. to DIN 12216 and in addition to standard, with DIN thread (GL).
Skip product gallery
From
€3.30*
From
€6.75*
From
€7.70*
From
€2.85*
From
€3.95*
From
€16.50*
From
€46.90*
From
€27.00*
From
€28.20*
From
€2.50*
From
€25.80*
Accessories
H W S Hans W. Schmidt
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
Bohlender GmbH
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
Otto Fahsig GmbH
Otto Fahsig GmbH
Gas leak detection fluid, bottle
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
J.P. Pöllath
J.P. Pöllath
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Engler distilling flasks, DURAN®, ASTM, with beaded rim
Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405
Buddeberg GmbH
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
Dr. Dietmar Glindemann
Dr. Dietmar Glindemann
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage <10-8 to 10-6 mBar l/s (vacuum and pressure)Solvent leakage from containers < 0.1 to 0.03mg/dayTemperature range: -196 to 300°C
Bohlender GmbH
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel, with set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
Skip product gallery
Screw connector caps, PBT
From
€1.90*
Silicone cap wads/septa, VMQ
From
€0.92*
Reduction adapters, DURAN® tubing
From
€9.90*
Silicone sealing rings, VMQ
From
€3.90*
Screw caps for screwthread tubes, PBT
From
€2.15*
Adapter for thermometer, borosilicate glass 3.3
From
€14.10*
Adapter for tubing, borosilicate glass 3.3, angled (90°), with stopcock
From
€51.60*
Adapters, straight, without stopcock
From
€10.90*
Adapters, angled (90°), without stopcock
From
€12.00*
Expansion adapters, DURAN® tubing
From
€16.10*
Adapters, angled (90°), with stopcock
From
€37.00*
Screwthread tubes with NS cone, DURAN® tubing, cap and sealing
From
€14.90*
Similar products
Red. With central hole (diameter outlined below). Temperature resistance to max. 180°C.
For GL-screwthread caps. Overall diameter and wad thickness as outlined below. Thermical resistance: 130°C (steam) / 200°C (heat). Autoclavable.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. Reduction adapters with ground joint.
With vulcanized PTFE sleeveFor screwthread capsThermical resistance: 130°C (steam), 200°C (heat)Autoclavable
Red. With DIN thread (GL) and aperture. temperature resistant up to 180°C.
Manufactured from borosilicate glass 3.3 according to DIN 12257 standard, ideal to use for thermometers with Ø 6 - 8 mm. Screw joint provides easy depth adjustment of thermometer. Seal material: NBR.
Tubing adapter is suitable for up to 10 mm tubing.Tubing adapter is suitable for up to 10 mm tubing.
Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.
Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. Expansion adapters with ground joint.
Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.
Screw thread adapters , made of DURAN® tubing, with screw-cap with aperture and silicone sealing ring with PTFE washers.