Tube tests NANOCOLOR® COD
Product number:
9304611
Manufacturer:
Macherey-Nagel GmbH & Co. KG
Packaging information:
Length:
160 mm
Width:
110 mm
Height:
120 mm
Weight:
0.35 kg
Description
- DIN ISO 15705
| Hazardous Substance Data | |
| GHS |     |
| Signal word | Gefahr |
| H-Satz | H302, H312, H314, H317, H331, H332, H340, H350, H360Df, H373, H412 |
| P-Satz | P202, P260D, P261S, P280sh, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P308+P313, P311, P333+P313, P363, P405, P501 |
| UNNR | 3316 |
| SDS | Link |
Properties
| Description: | COD 1500 |
|---|---|
| GHS: | GHS05, GHS06, GHS07, GHS08 |
| Manufacturer Article Number: | 985029 |
| Measuring range: | 100 - 1500 mg/l O2 |
| UNSPSC: | 41-11-61-16 |
Skip product gallery
Tube tests NANOCOLOR® Sulfide / Sulfite / Sulfate
From
€80.80*
Tube tests NANOCOLOR® ortho- and total Phosphate
From
€74.00*
Photometers MD 100
From
€516.10*
Waste Water Set-Up MD 610
From
€3,091.10*
Photometer photoLab® and photoFlex®, stored test programs
From
€31.00*
Spectrophotometer NANOCOLOR® Advance
From
€3,300.00*
Photometers MD 100 Boiler Water/Cooling Water
From
€649.70*
Reference Standard Kit
From
€85.60*
Spectrophotometer photoLab® 7100 VIS and photoLab® 7600 UV-VIS with OptRF
From
€5,142.00*
Similar products
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
The Lovibond® MD 100 Photometers are designed for analysis of different parameters in drinking water, industrial process water and waste water. With a total of more than 30 different types, instruments are available for routine testing as well as for special applications. The MD 100 uses high quality interference filters with long-life LEDs as a light source without any moving parts in a transparent sample chamber. The units supply accurate, reproducible results very quickly. Other major advantages include ease of operation, ergonomic design, compact dimensions and safe handling. Provided with calibration and software-based adjustment options the MD 100 is suitable for use as a testing instrument. The tests are conducted using either Lovibond® tablet reagents with long-term stability and a shelf life of 5 or 10 years, VARIO powder reagents or using liquid reagents.Optics: High-quality Interference FiltersWavelength accuracy: ±1 nm.Power supply: 4 micro batteries (AAA), capacity approx. 17 hours or 5000 tests.Automatic switch-off.LCD Display (backlit on keypress).Internal ring memory for 16 data sets.Dimensions (L x W x H): 155 x 75 x 35 mm.Scope of supply: Photometer in a plastic carrying case, with reagents for 100 tests, cells, batteries and standard accessories.Optional: IRiM - infrared interface module for data transfer to computer or printer.*Delivery without reagents for measuring range 0.1 - 10 mg/l Cl2.**24mm diam. glass cell***10mm diam. multi cell-2
Flexible wastewater measuring station with mobile photometer MD 610 and thermoreactor RD 125, complete with reagents for COD measurement and the appropriate accessories. With the MD 610, the measurement results of the wastewater can be called up and evaluated on a smartphone or tablet. The RD 125 thermoreactor is equipped with 24 holes for 16 mm cuvettes.Data transfer via Bluetooth® and AquaLX® appInterference filter for increased reproducibility of the resultsMemory for 500 measurement results120 pre-programmed methodsScope of supply: Photometer MD 610, standard accessories, Thermoreactor RD 125, Cuvette tests: COD (0 ... 150 mg/l, 0 ... 1500 mg/l, ammonium VARIO HR (1 ... 50 mg/l N), nitrate VARIO (1 ... 30 mg/l N), nitrite LR VARIO Powder Pack (0.01 ... 0.3 mg/l N), nitrogen VARIO Total HR (5 ... 150 mg/l N ), phosphate VARIO Total HR (0.02 ... 1 mg/l P / 0.06 ... 3.5 mg/l PO4), cuvette stand, membrane filtration set, operating instructions, warranty declaration
A: Stored in photoLab® S6, S12, photoLab® 6000/7000 Series and photoLab® SpectralB: Stored in photoLab® S12, photoLab® 6000/7000 Series and photoLab® SpectralC: Stored in photoFlex® STD, photoFlex® pH and photoFlex® TurbD: Stored in photoLab® 6000/7000 seriesReagent-free tests:COD, Nitrate, Nitrite optical reagent-free measurement in sewage plant outletsCu - copper plating bath, 690nm, 820nm - copper plating bath - BCrO3 - chromium plating bath - chromium plating bath - BNi - nickel plating bath - nickel plating bath - BHZ - Hazen colour - Hazen colour - BIFZ - iodine number, 340nm, 455nm - iodine number - Bm-1 (DFZ) - colouring - FB445 - B, Cm-1 (DFZ) - colouring - FB525 - A, Cm-1 (DFZ) - colouring - FB620 - B, CFAU - turbidity 620 - T620 - BE - extinction - extinction - A, B, CSAK - Spectral absorption coefficient at 254 and 436nm photoLab® 6100 VIS (436nm) and photoLab® 6600 UV-VIS (254/436nm)Further tests and checking aids like standards and reagent solutions for the instruments on demand, range information is based on max. range and can also be smaller for photoFlex®.All stored test sets for the photoLab® and photoFlex® photometers can be found in our online shop.Ordering information for all the articles described above and for other articles can be found online.
The spectrophotometer NANOCOLOR® Advance, with Reference Detector Technology (RDT), provides precise and reliable measurement and can be used in the entire spectrum of water and wastewater analysis. It can also be used mobile due to its rechargeable battery. With an additional 860 nm LED, the device determines the nephelometric turbidity during each measurement of a tube test and warns of incorrect results.Backlit colored 5" display with touch screenFully automatic cuvette recognition via the integrated 2D barcode scannerEvaluation of NANOCOLOR® tube tests (16 und 24 mm), standard tests (10, 20, 40, 50 mm) and VISOCOLOR® Powder PillowsOver 200 pre-programmed tests and special methods, 99 fully programmable methods, absorbance, transmission, factor, kinetics, 2-point calibration, scan, nephelometric turbidity measurement 1-1000 NTUScope of supply: Spectrophotometer NANOCOLOR® Advance, manual (quick start guide), protective covering, power supply unit with country specific adapters, USB stick, calibration cuvette, certificate, cleaning clothSpecificationsOptical system:Single beam photometer with grating monochromatorWavelength range:340 ... 800 nmWavelength accuracy:± 2 nmWavelength reproducibility:± 0.1 nmSpectral bandwidth: 4 nmPhotometric range:± 3.0 A in the range 340 ... 800 nmScattered light: 0.5 %Light source:Halogen lampData memory:1000 measured values / spectraInterfaces:2 x USB (Host), 1 x USB (Function)Dimensions (W x D x H): 280 x 325 x 130 mmWeigth: 3.8 kgPower supply:110 ... 240 V, 12 V 3A DCProtection class:IP67
Photometer instruments, specially designed for cooling and boiler water analysis. Thanks to the handy format and the user-friendly indicator chemistry, most of the important parameters can be determined on site. The photometers are supplied pre-calibrated with test methods, simply add the appropriate Lovibond® reagent sets (tablets, powder packs and liquids).Scroll MemoryAutomatic Switch-OffReal-Time-Clock and DateCalibration ModeBacklit DisplayStorage FunctionOne Time Zero (OTZ)Waterproof (IP 68)Scope of supply: instrument in a sturdy plastic case, batteries, 3 glass vials, standard accessories, instruction manual.Please order reagents separately! Please pay attention that some reagents could be used for Boiler Water or Cooling Water only.OpticsLEDs, interference filters (IF) and photo sensor in transparent sample chamberWavelength Accuracy± 1 nmPhotometric Accuracy
Photometric Resolution3% FS (T = 20°C - 25°C)
0,01 APower Supply4 micro batteries (AAA), capacity approx. 17 hours or 5000 testsAuto-Offautomatic switch-offDisplaybacklit LCD (on keypress)Storageinternal ring memory for 16 data setsInterfacesinfrared interface for test data transferAdditional Featurereal time clock and dateCalibrationfactory calibration and user calibration. Reset to factory calibration possibleDimensions155 x 75 x 35 mm (L x W x H)Weightbasic unit approx. 260 gEnvironmental conditionstemperature: 5 - 40 °C, rel. humidity: 30 -90% (non condensing)
The reference standards are designed to check the accuracy and the reliability of the results. The shelf life of reference standards is two years from the date of production, provided that storage and use are in accordance with the instructions provided.Applications: Water Treatment, Waste Water, Cooling/Boiler Water, Pool-Water, Beverage Industry, Laboratory and Field Testing.
COD measurement without reagents.The spectrophotometer of the photoLab® 7000 Series are universally usable and offer complete photometricfunctionality with lauded user-interface and guidance on a brilliant HD 7"" color display. Pioneering is the optical reagent-free measurement (OptRF) of COD, Nitrate and Nitrite. No time-consuming digestion and no harmful chemicals required.Proven routine analysis for waste and drinking water, aquaculture, food & beverage, environmental monitoring and productionCost saving reagent-free OptRF measurementUniversal for industrial, research and educational useLab quality in the field: 4,5 kg light weight, with car battery and field case optionLinking lab with Online-system WTW® IQ SENSORNET via IQ LabLinkFor 16 mm round cuvettes and 10, 20 and 50 mm rectangular cuvettes with automatic recognitionMemory for 5000 values, spectra and kinetics approx. 40 MB, equivalent to approx. 500 spectra (300-900 nm) and 400 kinetics with 150 measured valuesMore than 200 programmed methods, 1000 user defined methods, 20 profiles each for kinetics and absorption spectrum, extensive programming optionsRoutine Analysis:More than 250 programs for commercial test kits, standard parameters, direct readings of coloration, SAK, etc. as well as user-defined programming of routinesBarcode recognition for tests in vials and rectangular cells and automatic cell recognition for 16, 10, 20 and 50 mm without adapter and automatic measurement range selectionUp to three parallel timersOptional PC-Software Package for Brewery and color measurement from CIE to YellownessSpectral and universal analysis from 190 to 1100 nm:Spectral scans in various nm-steps, 700-2000 nm/minKinetics and multi-wavelength readings including special methods like chlorophyll and ADMI color measurementExtensive programming tools for multistep and multi-wavelength functions with user guidanceAQA: Multi-level user-friendly AQA functions with administration tools and comprehensive checking aids for meter and reagents.Data Management:Measurement data, PDF documents, spectra and kinetics data, with data filter for pre-selected data managementExternal barcode reading option for uncoded test kits and sample IDOptional: PC-Software for GLP compliant data management