Block thermostats PCH-1 / PCH-2 / PCH-3
Product number:
9721009
Manufacturer:
Grant Instruments Ltd.
Packaging information:
Weight:
4.55 kg
Description
Personal benchtop cooling/heating dry block for microcentrifuge tubes. The ingenious block construction, combined with the powerful Peltier module, produces very rapid cooling and heating.
| Temperature range: | -10 to +100°C |
| Heat up, amb. to 100°C: | 15 min |
| Cool down, 100°C to amb.: | 15 min |
| Cool down, amb. to -10°C: | 21 min |
Properties
| Description: | 20 x 0.5ml and 12 x 1.5ml microtubes |
|---|---|
| Manufacturer Article Number: | PCH-1 12V |
| Type: | PCH-1 |
Skip product gallery
From
€1,788.00*
From
€1,559.00*
Other customers also bought
Grant Instruments Ltd.
Grant Instruments Ltd.
Microtube thermoshaker PHMT
By combining the mixing operation with the incubation phase, reaction process times and operator workload are reduced and efficiency of many procedures is increased, resulting in a higher throughput.temperature range: +5 to 100 °Cuniformity at 37 °C: ± 0.1°Cshaking speed: 250rpm to 1400 rpmtimed shaking operation: 1 min to 96 hours rapid heat-upcontinuous or timed operation, with alarm buzzer and automatic switch-off facilityincl. interchangeable blockmixing and incubation phases are combined reducing reaction processing timesScope of supply: Thermoshaker with one block as indicated. Further blocks on request.
Grant Instruments Ltd.
Grant Instruments Ltd.
Microplate thermoshaker PHMP
For 96- and 384-well plates. The PHMP is a variable speed, variable temperature microplate shaker incubator with excellent temperature uniformity across the microplate. The patented heated lid and base which completely cover the plate produce a controlled micro-environment. This is combined with powerful orbital shaking to produce the maximum yield from your incubations.Stability ±0.1 ºC, uniformity ±0.25 ºC, rapid heat-upFor standard 96 or 384-well plates (max. 14mm height)Variable speed2mm shaking orbit for effective mixingTimed operation: 1 min to 96 hours
Skip product gallery
Exchangeable blocks Eppendorf SmartBlocks™
From
€664.00*
Digital dry bath LLG-uniBLOCKTHERM
From
€618.30*
Thermo Scientific™ Digital Dry Bath / Block Heater
From
€485.00*
Block Heaters, analogue and digital, BH-200 series
From
€940.70*
Block thermostats,QBD and QBH series
From
€912.00*
Cooling/Heating block Eppendorf ThermoStat C
From
€2,188.00*
SmartExtender™ for Eppendorf ThermoMixer™ C and ThermoStat C
From
€872.00*
Transfer racks for Eppendorf ThermoMixer™ C and ThermoStat C
From
€52.10*
Dry Block Heater Matrix Δ+
From
€2,309.00*
Similar products
Flexibility has never been this easy. Eppendorf offers a variety of SmartBlocks™ for tubes from 0.5 ml to 50 ml.Fast and simple block exchange due to Eppendorf Quick ReleaseOptimized block design guarantees maximum temperature transfer to the sample
Suitable for use in microbiological, histological, clinical, industrial and environmental laboratories. Various types of optional heating blocks are available as accessories for the LLG-uniBLOCKTHERM.Digital control with LED displayCan be used up to 120 °CFor timer and continuous operationCan be used with different heating blocks1 x block unitWith overheating protectionScope of supply: LLG-uniBLOCKTHERM, removal tool, lidPlease order heating blocks separately.Temperature accuracy at 100 °C:±1.0 °CTemperature accuracy 100 °C:±2.0 °CTemperature increment:±1.0 °CSpecificationsTemperature range:RT ... 120 °CTemperature uniformity at 37 °C:±0.5 °CTemperature accuracy at 37 °C:±0.5 °CTimer:
Block material:0 ... 99:59:00 min
AluminiumDimensions (W x D x H):175 x 290 x 85 mmWeight:3 kgPower supply:220 ... 240 V, 50/60 HzWarranty:3 years
Thermo Scientific™ digital dry baths, which offer a range of configurations with interchangeable modular blocks for a variety of application needs.Designed for basic to advanced applications with a max temperature of 130 °C, a timer and available in 1, 2 and 4 block sizes.Digital controls and display of time and temperatureAdvanced internal temperature sensing probe for outstanding temperature accuracy and controlPrecise temperature control with PID circuitTemperature calibration enables to offset the temperature to desired valueTimer allows the user to accurately monitor the heating timeWide range of interchangeable aluminum alloy heat blocks provide versatility and allow for easy cleaning and disinfectingPowder-coated steel body construction ensures durabilityBuilt-in over-temperature protection device warrants sample and user safetyTemperature deviation adjustmentBlocks are not included. Please order separately.Relative Humidity≤ 80%Temperature Accuracy≤ ± 0.5 °CTimer0 ... 99:59 min or continuousControllerPID digitalTemperature RangeAmbient + 5 °C – 130 °C (Ambient at 25 °C)Power supply200 ... 240 V, 50/60 Hz
choice of either analogue or digital modelsdigital models available with either 130 or 200 °C maximum temperaturethree block model for extra capacitydual control models have two blocks with independent temperature controluniform and stable block temperaturesDesigned for the precise heating of test-tubes, microcentrifuge tubes, cuvettes and microplates.Range compromises an economical analogue model with easy to use, dial setting and advanced digital models with bright, easy to read, LED display which facilitates setting of the required temperature and also accurate monitoring of the actual temperature.Excellent temperature stability and uniformity is maintained via sensitive, microprocessor control.Heats to 100°C in <12 mins.Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.With BioCote, silver-based, antimicrobial protection.SpecificationsTemperature stability at 37°C:± 0.1°CUniformity within block at 37°C:± 0.1°CUniformity within block at 130°C:± 1°CElectrical supply:230V 50Hz
Number of blocks:
Temperature range :
Display type:
Display resolution:
Dimensions (W x D x H) mm:
Net weight:
Heater power:BH200-2 // BH-200D-2 // BH-200D-2-HT
2
Amb.+8°C to +130°C // Amb.+8°C to +130°C // Amb.+8°C to +200°C
Calibrated knob // LED // LED
10°C // 0,1°C // 0,1°C
235 x 280 x 115mm
2.1kg // 2.3kg // 2.3kg
300W
Number of blocks:
Temperature range:
Display type:
Display resolution:
Dimensions (W x D x H) mm:
Net weight:
Heater power:BH-200D-3 // BH-200D-3-HT
3
Amb.+8°C to +130°C // Amb.+8°C to +200°C
LED
0,1°C
310 x 280 x 115mm
3.2kg
450W
Number of blocks:
Temperature range:
Display type:
Display resolution:
Dimensions (W x D x H) mm:
Net weight:
Heater power:BH-200DC-2 // BH-200DC-2-HT
2 (independent control)
Amb.+8°C to +130°C // +50°C to +200°C
LED
0,1°C
310 x 280 x 115mm
2.9kg
300W
For controlled dry heating of test tubes, microplates and Eppendorf tubes in interchangeable aluminium blocks. The following models are available:Choose from 3 digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and 1 digital high-temperature system (QBH2) with 2 blocksFast heat-up time and in-block temperature sensing capability using external sensor probe. Please order Cat. No. 6.228 714 separately.Built-in timer, programmable delayed start and RS232 output for data monitoringIncludes block removal toolRequires but does not include interchangeable QB-series blocksSpecificationsTemperature range:ambient 5 to 130 °C, QBH2: ambient 5 to 200 °CStability at 37 °C:
Uniformity±0.1 °Cwithin the block at 37 °C:
across similar blocks at 37 °C:±0.1 °C
±0.2 °CSupply requirements:230 V, 50/60 Hz, single phase
The ideal device to accurately set and maintain temperatures. Precise temperature control is achieved using optimally balanced heating and cooling elements (peltier technology). The cooling and heating temperature keys provide quick access to five important experimental temperatures (4°C, 16°C, 37°C, 56°C and 95°C). You can also individually store 15 programs.Excellent temperature accuracyPrecise temperature control from -10 to 110°C (110°C can be set when using 12 mm and cryo SmartBlocks™)Prevent condensation and improve temperature homogeneity with the new ThermoTopComprehensive range of program functionsScope of supply: Basic device, without Eppendorf SmartBlock™
A heatable frame/attachment for mixer, with separate temperature control (3 °C above RT to 110 °C), for simultaneous operation at two different temperatures.
Autoclavable transport aid for tubes from 0.5 to 2.0 mlFor transferring up to 24 tubes in / from the heating block at the same timeOffers protection against burns when transferring hot samples
Powerful Dry Block Heater for samples with very small volumes, e.g. blood samples, pharmaceutical agents, DNA/RNA samples or Elisa assays. Wide range of exchangeable attachments for various applications available.Without cross-contaminationLarge and clear display with a convenient menu structure allows for intuitive operationRobust aluminum die cast housingPlease order attachments separately.